Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dillon dies

Discussion in 'Handloading and Reloading' started by General Tso, Aug 12, 2010.

Thread Status:
Not open for further replies.
  1. General Tso

    General Tso member

    Joined:
    Oct 24, 2009
    Messages:
    386
    Location:
    Ohio
    Will Dillon dies work with my Lee turret press?

    Sent from my ADR6300 using Tapatalk
     
  2. dmazur

    dmazur Member

    Joined:
    Apr 28, 2007
    Messages:
    2,263
    Location:
    Pacific NW
    Yes and no.

    Yes, they have a universal thread size of 7/8-14 that fits almost all modern presses.

    No, they don't include an expander die. (Because they are marketed at folks who have a Dillon press and a powder-thru expander that is part of the powder measure.)

    So, if you are referring to Dillon pistol dies, you will have to do something else to handle creating a bell. If you are referring to Dillon rifle dies, they should work fine.
     
Thread Status:
Not open for further replies.

Share This Page