Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Double Speedloader Carrier Recommendations?

Discussion in 'Handguns: Revolvers' started by The_Shootist, Oct 10, 2010.

Thread Status:
Not open for further replies.
  1. The_Shootist

    The_Shootist Member

    Joined:
    Aug 15, 2003
    Messages:
    1,586
    Location:
    Richmond Tx, CSA
    Did a search under Accessories and under the Revolver Section but nothing popped out. Misplaced a nylon S/L carrier I had...so...

    I'm looking for a double speedloader carrier, so far the best candidate looks like a rig from El Paso Saddlery .

    But I'm open to other opinions. I already have a flat wallet type carrier that would carry either single rounds or a couple of speed strips, but I'm better with speedloaders.

    Any recommendations?
     
  2. joe_security

    joe_security Member

    Joined:
    Apr 22, 2007
    Messages:
    483
    What size belt do you want it for ? Maybe the Safariland 371 for regular belts or 370 for duty belts.
     
  3. SharpsDressedMan

    SharpsDressedMan member

    Joined:
    Feb 18, 2007
    Messages:
    5,957
    Location:
    NE Ohio
    Safariland used to make one that had the speedloader straddling the top of belt, and was simple and compact, basically wrapping the speedloader on to the belt. Don't know if they still make them.
     
  4. The_Shootist

    The_Shootist Member

    Joined:
    Aug 15, 2003
    Messages:
    1,586
    Location:
    Richmond Tx, CSA
    Thanks

    I've bought from Safariland before - I'll check them out.
     
  5. Dirty Bob

    Dirty Bob Member

    Joined:
    Jul 10, 2003
    Messages:
    969
    Location:
    The Great State of Texas
    I'm working on a double speedloader pouch that stacks the two speedloaders vertically. The trick is getting access to the lower loader after using the first one. I'm thinking of a solid bottom section for the lower speedloader, with the upper half closed by two pieces of leather that come together and are closed by the flap. I don't have time right now to work on this project, but I'm hoping to do so over the Christmas holidays, when the semester finally ends.

    I might have to reduce the size of the knob of the lower HKS speedloader, to let it pass between the rounds of the upper speedloader.

    Regards,
    Dirty Bob
     
  6. joe_security

    joe_security Member

    Joined:
    Apr 22, 2007
    Messages:
    483
    Copquest.com has most of the Safarilands in stock. Some are metal devices, no leather involved. I think the 371 is the one that SharpsDressedMan mentioned. 371s are singles for belts 1 1/2 or 1 3/4".
     
  7. Matt 357

    Matt 357 Member

    Joined:
    Feb 8, 2010
    Messages:
    81
    Location:
    Florida
    I have Comp II speedloaders for my 357. Anyone know if they will fit in the Bianchi Accumold pouches? I have an Accumold holster and belt and would like them to match.
     
  8. Dave_in_Fairview_Park

    Dave_in_Fairview_Park Member

    Joined:
    Aug 29, 2010
    Messages:
    31
    Location:
    Ohio
    I went with the HKS Universal Double Speedloader Pouch Nylon/price and weight.

    At first I was thinking 4 or 6 Speedloaders....Well I made a belt with 13 Pouch's & 26 Speedloaders,you can carry it,throw it around,they don't fall out.



    Safariland COMP-2 Revolver Speedloader
    HKS Revolver Speedloader/Manufacturer #: 10-A

    These 26 Speedloaders fill up the -(13) HKS Universal Double Speedloader Pouch Nylon Black-on the Ammo Belt.
     

    Attached Files:

  9. Gunner4h1r3

    Gunner4h1r3 Member

    Joined:
    Oct 21, 2007
    Messages:
    230
    Location:
    Virginia
    I carry two single speedloader pouches or speedloader "clips" made by Safariland. I believe they are called the "Split Six" in that it sits on top of your belt straddling it as someone has already mentioned. I know the leather pouches mainly fit the Safariland loaders but the clips will accept loaders up to and including L frames/GP-100 loaders and 5 shot .44 loaders. After looking at various makes and models of loader pouches I have found these to be the least bulky and extremely concealable. I use them mainly with my SP-101 and my S&W 638.
     
  10. Hartford71

    Hartford71 Member

    Joined:
    Apr 8, 2010
    Messages:
    6
  11. aryfrosty

    aryfrosty Member

    Joined:
    Nov 25, 2003
    Messages:
    455
    Location:
    Concord, New Hampshire
    Speedloader

    Another two sources are Dillon Precision and Midway.
     
  12. Dave_in_Fairview_Park

    Dave_in_Fairview_Park Member

    Joined:
    Aug 29, 2010
    Messages:
    31
    Location:
    Ohio
    Hartford71...price a bit high,but they are pretty.
    Singles ONLY $39.95

    Doubles ONLY $69.95

    ok for a walk down the runway,they might get beat up if you are crawling around the urban jungle
     
Thread Status:
Not open for further replies.

Share This Page