EAA Witness ELITE MATCH 10mm: mini review, Kimber ST II-10mm comparison.

[ATLDave]

If you are not aware, you can get the full target sight that comes on the Elite competition frame models for about 60 bucks; I imagine you slide probably has the same cuts and it would fit fine, but you could post pictures to be sure.

The Match has different slide/sight cuts than the other Elite series. Or at least the ones that I have owned did. Haven't looked at a Match made in the last 2 years, so I suppose it's possible they changed,

 

[ny32182]

Oh ok.... definitely would want to verify then! Thanks. I have never owned a Match.

 

[ATLDave]

On the plus side, Henning already has out his nice fixed rear sight for the Match sight cuts.

 

[Wreck-n-Crew]

Good report. You have yourself a keeper there! I'll not part with mine.

My 10mm Elite match is a real tack driver too. I got an 18lb spring from wolf but the brass still flies a mile. ordered a 22# and will give it a try when it gets here. I've had mine for almost 2 years. I've put roughly 4,500-5000 down it so far almost all my loads. Great gun but the mag is suppose to hold 14 and the spring is still so stiff it takes some real work to get #14 in. I just load 13 and bang away.

Anyway enjoy!

 

[roscoe]

And how long did it ultimately take for EAA to make it right?