Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Eagle Arms AR10

Discussion in 'Rifle Country' started by IRM, Dec 20, 2011.

Thread Status:
Not open for further replies.
  1. IRM

    IRM Member

    Joined:
    Dec 12, 2011
    Messages:
    16
    Is the Eagle Arms AR10 comparable to the Armalite AR10?
     
  2. Frankl03

    Frankl03 Member

    Joined:
    Apr 28, 2008
    Messages:
    711
    Location:
    Kansas City, MO
    Yes! You should be fine. I'm just not sure if they produce an AR10 with that name or roll mark any more. You could pair an Eagle Arms lower with an Armalite upper or vise versa.

    Eagle Arms bought Armalite or the name as I understand it. So its the parent company of Armalite? Somebody will correct me if I have it wrong!
     
  3. kimberkid

    kimberkid Member

    Joined:
    Feb 5, 2010
    Messages:
    1,112
    Yes ... Armalite ownes Eagle Arms ... but I've heard it both ways.

    What I know is I have an AR that the roll mark is "Eagle Arms by Armalite"
     
  4. zfk55

    zfk55 Member

    Joined:
    Dec 7, 2009
    Messages:
    299
    Location:
    Lost Prairie Montana
    This is a custom AR10 built on an Eagle receiver. The builder is the head of R&D for EDM arms, and the designer of the Windrunner series of 50's, .408' etc. This one is the prototype for the 2011 .308 lineup for EDM. This prototype has a lot of custom features not found in the others.

    She has a custom, internally re-machined Eagle AR10 receiver/magazine well cut to accept a slightly longer AR10 custom magazine, this because of the required OAL.
    All internal receiver areas are coated with a Tungsten Disulfide Matrix derivative. The chamber and throat are cut to accept one projectile profile only. The Sierra 175 MK, and no other. Because of these cuts the TTL, seat depth and OAL are specific and critical, thus the need and reason for a custom machined Mag-well.
    Walther 17-4 S/S barrel, internally tapered .006 electro-polished bore and a 1-10 ROT.
    SWS foregrip and a prototype trigger from his inventory that later evolved into the Chip McCormick trigger.

    Around 15 years ago he bought some 150 Eagle receivers to build his 1,000 yard rifles. This is one of them. He told me its a simple flip of the coin as to which receiver you'd want to use, but he got a great deal on these in bulk, so he used them. I'm a believer.

    Wilson1-1.jpg
     
  5. henschman

    henschman Member

    Joined:
    Nov 13, 2010
    Messages:
    2,880
    Location:
    Oklahoma City
    It's pretty much the same as an Armalite, except that it uses a plain chrome moly barrel instead of a chrome lined one like the Armalites. I don't think it comes with their 2-stage trigger, either. It lets them sell them a little cheaper.
     
Thread Status:
Not open for further replies.

Share This Page