Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

F-class shooters, please answer....

Discussion in 'Rifle Country' started by Fatelvis, Nov 5, 2007.

Thread Status:
Not open for further replies.
  1. Fatelvis

    Fatelvis Member

    Joined:
    Dec 25, 2002
    Messages:
    1,859
    Location:
    Lockport, IL
    I notice a few guys building rifles for F-class competition are using 30" barrels. In the past I wanted 26" barrels on my .308LR rifles, and everyone was telling me that long of a tube was unnecessary, because "powder burn is completed in 22inches" or something to that effect. If that statement was true, WHY would someone go to the extremes, and use a 30"? Thanks-
     
  2. matt87

    matt87 Member

    Joined:
    May 23, 2007
    Messages:
    299
    Location:
    Exeter, (formerly) Great Britiain
    Increased sight radius perhaps, if they are using irons. Also, velocity does not equal accuracy.
     
  3. USSR

    USSR Member

    Joined:
    Jul 7, 2005
    Messages:
    8,451
    Location:
    Finger Lakes Region of NY
    Fatelvis,

    While "powder burn" may be completed in the 22 inches that you mentioned, the pressure created by the burned powder remains and velocity increases even after the powder is consumed. In the case of the .308 at 1k, you need all the velocity you can get, as it is a marginal 1k cartridge at best. Many of the 1k .308 shooters are now shooting the 155gr Lapua Scenar bullet at about 2950fps. That's as good as it gets with a .308.

    Don

    P.S. - F Class shooters use scopes, so sight radius does not factor in.
     
  4. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    22,311
    I have not been in Long Range very long, but the only barrels I have seen as short as 24-26" were the ones on factory rifles being shot at entry level. Like my Savage 12BVSS, bought just before they announced the factory F-class rifles, darn it.

    I don't think the statement "powder burn is completed in 22inches" is true. Bullet accleration past about 24" is more gradual than going from short to medium lengths, but it is still there and is "free" with no more powder, pressure, or erosion. And a little more velocity is a little less windage.

    A longer barrel also adds weight, which is generally desirable.
     
  5. Fatelvis

    Fatelvis Member

    Joined:
    Dec 25, 2002
    Messages:
    1,859
    Location:
    Lockport, IL
    Thanks for the replies. How much extra velocity could one expect going from a 26" to a 30" barrel?
     
  6. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    22,311
    Too many variables to predict. I have seen reports of everything from 8 fps per inch to 25 or more.

    When I replaced the factory barrel on that Savage with a Pac-Nor, I bought a 28" largely because that was the longest available at the base price. Longer cost more, so I figured I could get by with 28". It seems to do OK.
     
  7. USSR

    USSR Member

    Joined:
    Jul 7, 2005
    Messages:
    8,451
    Location:
    Finger Lakes Region of NY
    I did the very same thing when I had my 6.5x55 F Class rifle built. High velocity and weight are your friends in F Class.

    Don
     
  8. Swampy

    Swampy Member

    Joined:
    Apr 1, 2003
    Messages:
    906
    Location:
    SouthWest MO
    + 1

    Best,
    Swampy

    Garands forever
     
Thread Status:
Not open for further replies.

Share This Page