Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Free S&W work in Pinellas Park, FL

Discussion in 'Handguns: Revolvers' started by DDGator, Aug 23, 2003.

Thread Status:
Not open for further replies.
  1. DDGator

    DDGator Member

    Joined:
    Dec 30, 2002
    Messages:
    460
    Location:
    Tampa Bay Area, Florida
    For those who are near Clearwater/Pinellas Park in FL --

    Bill Jacksons Shop for Adventure is having a Smith & Wesson weekend. There are factory reps on site, demo guns to shoot (including the new 500 Magnum), and a S&W Performance Center Gunsmith.

    The Smith is there to do free action jobs "while you wait" on any new guns sold -- and will do any S&W when there are not newly purchased guns waiting. I had three guns done today at no charge -- a 625, 686 and 442.

    The Smth (Jeff) did a great job -- lubed the internals with a teflon grease, sanded and stoned the appropriate parts, swapped out a spring, and generally got everything working right. On my 625 that I use for IDPA he paid special attention to lightening and shortening the pull.

    Wow! Thanks S&W! I must have gotten $200 worth of gunsmithing today.

    The will be there all day tomorrow as well. If you are nearby -- its definitely worth the trip!
     
  2. Gordon

    Gordon Member

    Joined:
    Dec 26, 2002
    Messages:
    8,118
    Location:
    central Kali.
    Wished I was there to have him tune up the miss machined sights on the new Mountain Gun I bought (and returned to store) last year.:(
     
  3. MR.G

    MR.G Member

    Joined:
    Dec 26, 2002
    Messages:
    609
    I am going to stop by there today on my way to an appointment and see what they have. Will probably bring my my 627 PC 3" and see if the smith has time to tune it.
     
  4. usnavymasterchief

    usnavymasterchief member

    Joined:
    Feb 6, 2003
    Messages:
    236
    Location:
    West Central Fla
    What a shame that a "smithy" has to work on a new S&W that probably cost in excess of $500 or $600. That speaks volumes to me about S&W products.
    The absolute worst gun I ever owned was a S&W 340PD. IMHO, for what it's worth, new S&W products are terrible.
     
  5. firestar

    firestar member

    Joined:
    Jan 2, 2003
    Messages:
    1,761
    usnavymasterchief,
    S&W revolvers are not what they used to be. I too have noticed that the triggers on new S&Ws are often really bad, esp the Scandium and Titanium guns.
     
  6. STPRMON1

    STPRMON1 Member

    Joined:
    Dec 25, 2002
    Messages:
    12
    Bill Jacksons

    I received the invitation in the mail but have not made it there as yet. Just where do they plan on shooting the big guns at? Last time I was at Jacksons you couldn't even shoot .357 mag there let alone athe .500 S&W.
    Hope to have fun there also. Isn't it next weekend also?
     
  7. Gewehr98

    Gewehr98 Member

    Joined:
    Dec 24, 2002
    Messages:
    5,988
    Darn it!

    That's probably too far to drive from Cocoa Beach, and I'd love to have a lube and tune done on my 696. :(
     
  8. DDGator

    DDGator Member

    Joined:
    Dec 30, 2002
    Messages:
    460
    Location:
    Tampa Bay Area, Florida
    I am not aware of any handgun caliber restrictions at Bill Jacksons. They were shooting the 500 Mag at the indoor range.

    The sale is on next weekend too -- but no S&W reps or anything. Next week is Glock and Ruger.
     
  9. MR.G

    MR.G Member

    Joined:
    Dec 26, 2002
    Messages:
    609
    They don't allow magnums at their range, but they are making an exception for the show. They had guns there to shoot, including the 500. The S&W rep said that a 30 day range pass came with each new gun purchased at the show. I don't know what they will do when those people that bought the 500's bring them in to shoot. I was told once, while shooting there, that my ammo was too loud. Also asked to leave once for shooting too fast. They are pretty touchy. Nice place though.
    Had three guns tuned there today by the S&W gunsmith, at no cost. He did a great job. Also talked to the other factory reps about the new PC models that are comming out. A really great show by S&W and Bill Jacksons.
     
  10. STPRMON1

    STPRMON1 Member

    Joined:
    Dec 25, 2002
    Messages:
    12
    Jacksons

    They have a really nice place and the hunting department has been remodeled. I have purchased four handguns from them as they had what I wanted. There are only maybe two sales people that are nice out there, and the rest either do not care or are snobbish. I understand about making an exception for the sale but how could they tell people that they cannot shoot a certain handgun after the .500. Also no kids. I usually go to the St. Pete Police Range. No hassles. Knights is to expensive to shoot.
    Maybe I will go next weekend when I have some extra cash.
     
  11. MR.G

    MR.G Member

    Joined:
    Dec 26, 2002
    Messages:
    609
    The day that I was asked to leave for shooting too fast, I went directly to the St Petersburg pistol club and bought an annual membership. Havn't shot at Jacksons since then. The St Petersburg range doesn't care how fast or loud you are. I know what you mean about the staff at Jacksons. What I do like about them is that they are open seven days a week, and they have a good inventory. Prices are not always the best though.
     
  12. DDGator

    DDGator Member

    Joined:
    Dec 30, 2002
    Messages:
    460
    Location:
    Tampa Bay Area, Florida
    I agree the Bill Jacksons range leave a lot to be desired -- like air conditioning. I dont shoot there often, but I like the fact they have an all day rate. Garry is the only guy that I really like there -- very knowledgeable guy.

    Knights is a great place to shoot -- but about $11 an hour. I find the sales people there to be either not that knowledgeable or gun snobs for the most part.

    St. Pete Police Range is nice -- I shoot the IPSC mini-matches there on Tuesday nights sometimes.
     
  13. Richard2003

    Richard2003 Member

    Joined:
    Jan 31, 2003
    Messages:
    74
    I met Dwayne there (DD Gator) and Dwayne I plan on getting one of your pocket holsters. The one you had was very high quality.
    The Smith guy did action jobs on my 625 Mountain gun in .45 Colt and also my Model 18 which turned out to have already had work done on it which I was unaware of.

    Why did they cut off the thread about this in the Smith & Wesson forum?
     
  14. zxc

    zxc Member

    Joined:
    Dec 24, 2002
    Messages:
    69
    S&W rep was very nice and helpful, esp to the
    new owners; answering and taking time to be
    helpful with the purchase. humbled by the
    work he did on my 68 vintage Jframe. Nice human
    face behind the product, thats all.
     
  15. MR.G

    MR.G Member

    Joined:
    Dec 26, 2002
    Messages:
    609
    I sent S&W an email thanking them for putting on a great show, and for the work on my guns. They really do have some good factory reps. Hope that they do it again soon.
     
  16. DDGator

    DDGator Member

    Joined:
    Dec 30, 2002
    Messages:
    460
    Location:
    Tampa Bay Area, Florida
    Richard,

    Thanks for the compliment on the pocket holsters (www.kdholsters.com)

    The thread in the S&W forum wasn't closed -- just moved -- to the Gunsmithing forum. I don't think that was a great place for it -- but that is where it went.
     
  17. 4v50 Gary

    4v50 Gary Moderator Staff Member

    Joined:
    Dec 19, 2002
    Messages:
    18,535
    Free work? Wow! That smacks of the old days at Camp Perry when Fitz use to service Colt revolvers for free. Of course, this was way before my time. Perhaps C. R. Sam remembers it.
     
  18. Mike Irwin

    Mike Irwin Member

    Joined:
    Dec 22, 2002
    Messages:
    7,956
    Location:
    Below the Manson-Nixon line in Virginia...
    The chances of anyone from S&W working on my guns is nonexistent. I've encounted far too many horror stories, both here an in real life.
     
  19. zxc

    zxc Member

    Joined:
    Dec 24, 2002
    Messages:
    69
    Thanks for the word of caution.
     
Thread Status:
Not open for further replies.

Share This Page