Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

General Info on .45 ACP 200 Grain XTP Load

Discussion in 'Handguns: Autoloaders' started by TC8500, Feb 1, 2013.

Thread Status:
Not open for further replies.
  1. TC8500

    TC8500 Member

    Joined:
    Feb 9, 2011
    Messages:
    41
    I thought I would pass along the following load data in case anyone is interested. I loaded 6.5 grains of Win 231 behind a 200 grain Hornady XTP and shot this load from a Sig P220. This is a very accurate load with mild recoil. I also shot this same load with Berrys 200 grain plated HP with the same results. The velocity for this load averages 970 fps. I used a Hornady #3 reloading manual for the data which listed the Max load at 6.7 grains of 231. Brass used was Federal and Speer, Primer used was Winchester Large Pistol.
     
  2. SharpsDressedMan

    SharpsDressedMan member

    Joined:
    Feb 18, 2007
    Messages:
    5,957
    Location:
    NE Ohio
    Thanks. I'll give it a try next time I load some 200's.
     
  3. Sauer Grapes

    Sauer Grapes Member

    Joined:
    Feb 19, 2009
    Messages:
    1,246
    Location:
    S.E. PA.
    I've been toying with the notion of loading my own SD loads for home. Thanks for the info. I can buy XTP bullets local. I think I'll try them.
     
Thread Status:
Not open for further replies.

Share This Page