Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

General purpose rifle powder?

Discussion in 'Handloading and Reloading' started by TFin04, Jan 3, 2008.

Thread Status:
Not open for further replies.
  1. TFin04

    TFin04 Member

    Joined:
    Oct 30, 2006
    Messages:
    267
    Okay folks, I appreciate the help so far with my reloading questions. I've been set up and reloading for 38spl and 9mm for a while now.

    I am getting into reloading for my rifles now, and would like to purchase a 8lb jug of powder.

    The rifle calibers I plan to reload are 223rem and 30-30 Winchester. I may eventually get into 308 or 30-06, but I don't even own guns that shoot that round at this time.

    Is there a powder that is suitable for 223 and 30-30? I'll be buying online and paying the hazmat fee. I need to purchase this powder from somewhere that also offers primers for these calibers at a good price as well.

    I don't have a lot to invest into a powder for each, and I'm trying to keep this is as simple as I can.

    Cost is my main concern, with accuracy coming second. I've yet to find a handload of mine that wasn't at least as accurate as factory ammo, with the majority of them being more accurate than what I can find in the stores.

    What is your advice?

    Thanks!
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    BLc/2, WW748, and Varget do a passable job in a lot of standard calibers.

    WW748 is especially good in .223 & 30-30 with normal weight bullets.

    [​IMG]
    rcmodel
     
  3. TFin04

    TFin04 Member

    Joined:
    Oct 30, 2006
    Messages:
    267
    Thanks rcmodel. Where would you recommend I purchase WW748 as well as a good lot of primers?
     
  4. sublimaze41

    sublimaze41 Member

    Joined:
    Jul 28, 2007
    Messages:
    583
    Location:
    Peoples Republic of Western New York
    Powder Valley. Great Prices, Great service.
     
  5. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    21,999
    Powder Valley is the only place I have ever mailordered smokeless from.

    Winchester primers are made a little hotter to ignite Ball powders and I would get them for Win 748.
     
  6. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    In fact, some loading data calls for Magnum Primers with WW748, because it is a ball powder.

    With that said, I load .223 & 30-30 with CCI standard primers and have been for about 30 years.
    And I have never had a problem with ignition, or getting great accuracy.

    [​IMG]
    rcmodel
     
  7. dmftoy1

    dmftoy1 Member

    Joined:
    Nov 17, 2003
    Messages:
    2,213
    Location:
    Lexington, IL
    I've had good luck with H335 in .223 and also in .308 .. just took a quick look at it for 30-30 and it appears that there are a decent number of loads for it there. (FWIW)
     
  8. aka108

    aka108 Member

    Joined:
    Aug 26, 2006
    Messages:
    1,988
    Location:
    Tallahassee, FL
    You might want to read some load tables and purchase one pound lots of several different powders before jumping in on a large container and find it not to your liking.
     
  9. Grandpa Shooter

    Grandpa Shooter Member

    Joined:
    Oct 11, 2007
    Messages:
    930
    I recently did a search for one powder for .223, 30-30, .308 and 30.06. I started out searching through my books, and then went on line. I narrowed it down to H4895 or IMR4895. Then I went to a store where a number of my old shooting cronies work and one of them talked me into Varget. Since I just finished getting my equipment set back up I haven't loaded with the Varget yet but have heard really good reports from fellow shooters

    Getting things like primers and powder on line is getting harder. Just getting primers anywhere is getting harder. Be patient and search and make that haz mat fee work for you.
     
  10. TFin04

    TFin04 Member

    Joined:
    Oct 30, 2006
    Messages:
    267
    What do you guys think about these Berry's bullets for the 30-30?

    They are cheap, but it says not to exceed 1700 fps with them. All the load data I can find has 30-30 at much higher velocities than that.

    http://www.berrysmfg.com/386.php
     
  11. 38 Super Auto

    38 Super Auto Member

    Joined:
    Dec 26, 2007
    Messages:
    92
    Location:
    Northern Indiana
    Ditto on the WW748 - it is pretty close to general purpose rifle powder I think Powder valley is a good outfit.

    Grandpa Shooter - I tried Varget a few years ago and it caused bridging in my Dillon powder measure. :banghead:

    I ended up trading it away. I hope you have good luck with it.
     
  12. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    I think the Berry bullets would be fine for reduced loads used for plinking.

    I don't believe they would work too well for full power 30-30 loads though.

    I'm loading them in 9mm & .380 with good success, although they do seem to demand a perfectly fitted seating stem. They deform very easily with the wrong seating stem.

    BTW: They also caution against using a firm bullet crimp or jacket separation could leave a bore obstruction.

    Since you will want a firm crimp in a tubular magazine 30-30, that might be a problem.

    [​IMG]
    rcmodel
     
  13. TFin04

    TFin04 Member

    Joined:
    Oct 30, 2006
    Messages:
    267
    Odd they would make a bullet specific for the 30-30 with the conditions that caliber requires. I'm going to make a separate thread for it, hopefully it will get more exposure and somebody has tried it.
     
  14. Urbana John

    Urbana John Member

    Joined:
    Feb 18, 2007
    Messages:
    173
    I like IMR 3031 for my rifle rounds, .223, and .308 also good with 30-30's, 8mm Mauser's and 30-06's
     
  15. ocabj

    ocabj Member

    Joined:
    Jan 22, 2003
    Messages:
    2,383
    Location:
    Riverside, CA
    As much as I love Varget, I think H4895 is more flexible. Works in both bolt and gas guns for a wide range of cartridges from .223 to .30-06 with a wide range of bullet weights.
     
  16. Shawnee

    Shawnee member

    Joined:
    Oct 17, 2006
    Messages:
    3,306
    Location:
    Along "That Dark and Bloody River"
    I have used 3031 in 30/30s and had great results in a Remington 788 and pretty good results in several different Marlin 336s. Never got around to trying 748 for it though.

    :cool:
     
  17. hawkeye1

    hawkeye1 Member

    Joined:
    Jul 11, 2007
    Messages:
    175
    I have had good results with H335 and H4895 in both the 30-30 and the 223. In fact I have some great results with 4895 in the 223.

    Recently I have gone to Hodgdon Benchmark for the 223 with light bullets. It is showing some great results.

    As for the 308 and the 30-06 I use the H4350 more than any other. They work great. I used to use the IMR 4350 but read where the H4350 (and other H powders for that matter) were much less temperature sensitive. It may be over 100 degrees in the summer and well below freezing during deer season. They say the Hodgdon powders will stay more consistent.

    Good shooting
     
  18. K3

    K3 Member

    Joined:
    Nov 14, 2006
    Messages:
    1,508
    Location:
    Looking through the scope at a coyote
    I've had good results with IMR 4895 in a wide range of cartridges. I use it for .30-30, .223 varmint rounds, and behind 180gr .30 cal bullets from Sierra Gamekings to Hornady SSTs. Good groups with all.
     
  19. John4me05

    John4me05 Member

    Joined:
    Dec 8, 2007
    Messages:
    356
    Location:
    Alleghany County VA
    I use Varget for both my 30-06 and 223... They are the only 2 rifles i am reloading right now but its great to have both guns on the same powder..
     
  20. K3

    K3 Member

    Joined:
    Nov 14, 2006
    Messages:
    1,508
    Location:
    Looking through the scope at a coyote
    I like Varget too. I actually had some nice results in a .45-70 I loaded for a buddy using 405gr jacketed bullets.
     
  21. KI.W.

    KI.W. Member

    Joined:
    Aug 26, 2007
    Messages:
    548
    Location:
    Finland
    Thanks guys. Nobody was not telling something aboat VihtaVuori N-133. It is the most best powder for .223 Rem and 30-30 calipers in the whole world. We here in Finland need it to much. It is hard to find it. ;):uhoh :uhoh: :rolleyes:
     
  22. ADKWOODSMAN

    ADKWOODSMAN Member

    Joined:
    Sep 19, 2006
    Messages:
    1,066
    Location:
    Adirondacks of NYS
    I'll second IMR4895 and WW748. I've never used Varget. I'll have to give it a try. Half the fun of reloading is trying something new.
     
  23. John4me05

    John4me05 Member

    Joined:
    Dec 8, 2007
    Messages:
    356
    Location:
    Alleghany County VA
    Varget does tend to lead to the sticking thrower referred to earlier.. A couple of sticks will be sheared off here and there.. But it produced the best groups in my .223 out of RL7, H4895, and 1 other i used for testing along with the Varget.. Best group out of the other 3 was a little over 3/4 at 100 and the Varget punched a group just under 1/2 at 100... 5 shot groups..
     
  24. TFin04

    TFin04 Member

    Joined:
    Oct 30, 2006
    Messages:
    267
    Okay fella's, thanks for the info. I'm placing an order for primers, powder and bullets with powder valley this week. I've decided to go with H4895 for my powder.

    Looks like I can cook up 223 for less than $.15 per round (free brass). It could be even lower but I'm only buying bullets and primers in 1000 lots to start off with. I'm holding off on 30-30 for now, at least I'll have some powder on hand when I decide to get the other components.

    I'm going with 55gr FMJ bullets to shoot in my Savage 10FP bolt gun and my Bushy AR (Both 1in9 twist). I'm looking forward to finding a good load for the AR and cranking out a bunch of rounds, and also fine tuning a load for my Savage to take prairie dog hunting in the spring. I figure I'll do about 300 rounds tuned for the savage and the remaining 700 for my AR.

    Thanks again!
     
  25. John4me05

    John4me05 Member

    Joined:
    Dec 8, 2007
    Messages:
    356
    Location:
    Alleghany County VA
    If you rememebr how much each is off hand ill give you a total...
    Break it down like this..

    Bullets XXXX rounds at $XXX
    Powder XXX pounds at $XXX
    Primers XXXX primers at $XXX
    wont take but a minute to give you the cost per box of 20
     
Thread Status:
Not open for further replies.

Share This Page