Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Good mid-powder 180 grn 10mm load

Discussion in 'Handloading and Reloading' started by Fatelvis, Sep 29, 2010.

Thread Status:
Not open for further replies.
  1. Fatelvis

    Fatelvis Member

    Joined:
    Dec 25, 2002
    Messages:
    1,859
    Location:
    Lockport, IL
    What is a good "middle of the road" power load for the 10mm, using a 180 grn jhp bullet? Thanks-
     
  2. Glock20

    Glock20 Member

    Joined:
    Feb 9, 2010
    Messages:
    159
    Location:
    Eugene, Oregon
    Fatelvis - I've had good accuracy with 180gr JHP mid 10mm auto loads using -
    Hodgdon's (online) data of 6.0 grains of TiteGroup & 6.4 grains of Universal. Both are max for the powder listed on the site, but are mid + loads for a 10mm at a little over 1100 fps.
    You should start at the lower end of Hodgdon's data and work up.

    I've used Montana Gold's 180gr JHP and Hornady's XTP's with these loads and they are both very accurate out of my Glock 20.
     
  3. noylj

    noylj Member

    Joined:
    Jul 27, 2007
    Messages:
    1,078
    5.3gn 231/HP38
    8.5gn AA5
    6.6gn Herco
    5.7gn Bullseye
    6.8gn Power Pistol
    5.6gn TiteGroup
    5.2gn WST
    COL 1.250-1.260"
     
Thread Status:
Not open for further replies.

Share This Page