Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Got my .44 Magnum Ruger Super Blackhawk

Discussion in 'Handloading and Reloading' started by Eb1, May 17, 2010.

Thread Status:
Not open for further replies.
  1. Eb1

    Eb1 Member

    Joined:
    Jan 15, 2008
    Messages:
    3,010
    Location:
    USA
    Now I am needing to find some loadings. Yes, I have my manuals, and I am not a novice to reloading. Just wanting to know what some of you all's favorite loads are.

    My goal is a decent power 200-240 grain bullet around 1000-1200 fps. Whatcha got?
     
  2. Idano

    Idano Member

    Joined:
    Oct 2, 2006
    Messages:
    933
    My pet load for my Anaconda is 23.4 gr of H110 behind a Hornady 240 gr HP XTP. Good accurate round that works well; a few years ago took nice 6 1/2 foot black bear with that load. One shot dropped him in his tracks at 30 yards. Once you get a chance to shoot that new gun let me know how you like it I have been thinking of retiring my Anaconda to the safe since the market value has went so high on them and getting the Ruger to hunt with.
     
  3. Eb1

    Eb1 Member

    Joined:
    Jan 15, 2008
    Messages:
    3,010
    Location:
    USA
    I shot the gun. I shot it with a loading of 15.0 grains 2400 and a 200 grain RNL in a 44 special case. I shot it today. It was fun. A little stiffer than anything I have shot before, but not painful. Well let me say stiffer than any .357 Mag I have shot. Very accurate at 15 yards. I do not have a clue at how fast these rounds would be coming out of the gun. The barrel is 5 1/2" long.
    I am not afraid of the gun and recoil. I would just like to get a good target load that you know you shot a big gun. I want to be accurate, and develop into the gun without developing a flinch. I would also like for this round to be good for hog defense when I am out on the farms. So a 240 grain HP at 1500+ is not my desire at the moment. Something a little more than a .45 Colt or a stiff .44 Special is right around where I want to be at this point.

    Could someone give me an estimate of what a 200 grain RNL out of a 5.5" barrel with 15.0 grain 2400 would be moving at please?
     
  4. General Tso

    General Tso member

    Joined:
    Oct 24, 2009
    Messages:
    386
    Location:
    Ohio
    Hornady XTP 240gr. with 23 grains of Accurate 5744.
     
  5. Eb1

    Eb1 Member

    Joined:
    Jan 15, 2008
    Messages:
    3,010
    Location:
    USA
    What is your data from that load, G_T?
     
  6. bear375

    bear375 Member

    Joined:
    Apr 27, 2010
    Messages:
    31
  7. MovedWest

    MovedWest Member

    Joined:
    Feb 8, 2009
    Messages:
    495
    Location:
    Silicon Valley
    I've developed a nice round that groups beautifully in all my SBH's (7.5" barrels). It's a bit on the high end, but a tad under max pressures. Regardless, proceed with caution and build your rounds up responsibly.

    Bullet: 240gr JHP (XTP)
    Charge: 20.5gr 2400
    Primer: CCI300
    OAL: 1.600"

    or

    Bullet: 240gr JHP (XTP)
    Charge: 19.6gr 2400
    Primer: CCI350
    OAL: XTP=1.600"

    Good luck and straight shootin'.

    -MW
     
Thread Status:
Not open for further replies.

Share This Page