Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Grendel P30

Discussion in 'Handguns: General Discussion' started by stevekalch, Sep 20, 2009.

Thread Status:
Not open for further replies.
  1. stevekalch

    stevekalch Member

    Joined:
    Oct 28, 2008
    Messages:
    13
    Location:
    Florida
    Hey just picked up an old Grendel P30. It needs a good cleaning but theres no manual with it. Anybody know the best way to go about the take down? Thanks!
     
  2. PT1911

    PT1911 Member

    Joined:
    Feb 27, 2009
    Messages:
    3,139
    Location:
    alabama
    I actually acquired one of these interesting little pieces... the takedown is actually pretty simple... you have to remove the break (if yours has one) there is then a metal bushing at the end of the barrel (it is checkered for grip) you twist that off and the spring and you can then remove the slide from the frame... If I remember correctly...


    it isnt difficult at all... just be careful in unscrewing that piece as you can shoot it and your spring across the room... cool guns..... still looking for some ammo that will function 100% through mine... supposedly the winchester super X works well, dunno yet.
     
  3. PT1911

    PT1911 Member

    Joined:
    Feb 27, 2009
    Messages:
    3,139
    Location:
    alabama
    I actually just pulled mine out and disassembled/reassembled it in about 2 min.. only needed an allen wrench to remove the muzzle break..
     
  4. nalioth

    nalioth Member

    Joined:
    Jul 9, 2007
    Messages:
    5,841
    Location:
    Houston, Texas
    I hope his gun isn't broken.

    "break"
    • become separated into pieces or fragments; "The figurine broke"; "The freshly baked loaf fell apart"
    • render inoperable or ineffective; "You broke the alarm clock when you took it apart!"
    • ruin completely; "He broke my radio!"

    "brake" (which is what I think you mean)
    • anything that slows or hinders a process;
     
  5. stevekalch

    stevekalch Member

    Joined:
    Oct 28, 2008
    Messages:
    13
    Location:
    Florida
    Thank for the quick reply. Mine doesnot have the brake. I cant seem to the the bushing off the front of the barrel. It spins and loosens but doesnt come all the way off. It just stops turning.
     
  6. stevekalch

    stevekalch Member

    Joined:
    Oct 28, 2008
    Messages:
    13
    Location:
    Florida
    It looks like there is a gasket or o-ring seal in between the bushing that may be broken and seems to be getting stuck in the threads. I dont wanna force it through. Any ideas?
     
  7. stevekalch

    stevekalch Member

    Joined:
    Oct 28, 2008
    Messages:
    13
    Location:
    Florida
    went and got a wrench. just needed a little help getting throught the years of sitting. Cleaned up and smooth moving now!
     
  8. PT1911

    PT1911 Member

    Joined:
    Feb 27, 2009
    Messages:
    3,139
    Location:
    alabama
    they are pretty simple when you take the leap... and yes.. it was a BRAKE... give me a break guys....
     
Thread Status:
Not open for further replies.

Share This Page