Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Gun cases - cutout foam - any good ones?

Discussion in 'General Gun Discussions' started by Outlaws, Jun 29, 2006.

Thread Status:
Not open for further replies.
  1. Outlaws

    Outlaws Member

    Joined:
    Apr 10, 2006
    Messages:
    2,481
    Location:
    Valley of the Sun
    What is a good rifle case that has the 3 layers of foam so that I can die cut my rifle into the middle layer and have some accessories cut out too?

    I see the Pelican 1750 looks nice, but I am having a hard time finding big pics of it. Is it 3 layers or only 2?
     
  2. DMSHEPARD

    DMSHEPARD Member

    Joined:
    Dec 18, 2005
    Messages:
    41
    Location:
    Massachusetts
    I have a Browning Travel Vault #5115. It is of the three layer variety. I did the same thing you are mentioning. It is a two rifle case. Waterproof, floats, has wheels for toting. It also has an air lock to break the vacuum should you travel to a different elevation and try to open it. You could run over this with a truck and I doubt you could damage the guns inside. Was about $200 6-8 years ago. Very well made and worth the money.
     
  3. Preacherman

    Preacherman Member

    Joined:
    Dec 20, 2002
    Messages:
    13,309
    Location:
    Louisiana, USA
    I have a couple of the Starlight cases. They sound pretty similar to what DMShepard describes. I have this model, which has a 5-part foam system (1 thin sheet, 1 thick, 1 thin, 1 thick, 1 thin, in that order). One could actually fit four long guns into this case, provided that each was no thicker than 1½" or so, so that they could fit into the thick layer without overlapping. I also have the high-density foam, which doesn't compress, and holds the guns very firmly. One cuts out an outline of the gun in the thick foam, and fits it in.

    These cases will float even when fully loaded - a plus if Katrina II happens to come along! :D
     
  4. Bubbles

    Bubbles Member

    Joined:
    Apr 26, 2004
    Messages:
    3,152
    Location:
    Eastern Panhandle of West Virginia
    I have two Pelican 1750's. They have the three layers of foam.

    Pelican also stands by their products. I loaned a case to a friend so he could transport his rifles on United Airlines. United trashed the case on his return flight, but the rifles were just fine. Pelican replaced the case at no charge.

    ETA: The rep at Pelican mentioned that United Airlines was well-known for trashing rifle cases.
     
  5. mrmeval

    mrmeval Member

    Joined:
    Oct 2, 2004
    Messages:
    1,768
    Location:
    Greenwood, Indiana
    They had to work at trashing that case. For what Pelican's cost it should have come with a harem or at least a Bahamas cruise. :neener:
     
  6. roo_ster

    roo_ster Member

    Joined:
    Oct 2, 2003
    Messages:
    2,974
    Location:
    USA
    Pelican Cases are good shinola, Maynard.
     
  7. Outlaws

    Outlaws Member

    Joined:
    Apr 10, 2006
    Messages:
    2,481
    Location:
    Valley of the Sun
    Well I got the Pelican 1750. Seems like a good case. My Winchester is about as good IMO interms of quality, but not for airline use. But I really like the die cut for the rifle more than pressure like most cases.
     
  8. esheato

    esheato Member

    Joined:
    Apr 8, 2003
    Messages:
    2,784
    Location:
    NoVa
    Any experience with the SKB cases? Midway has a two rifle case with foam cutouts that looks nice.

    Thanks in advance.

    Ed
     
  9. Outlaws

    Outlaws Member

    Joined:
    Apr 10, 2006
    Messages:
    2,481
    Location:
    Valley of the Sun
    That looks nice, but this one I get to cut my own shape rather than a pre-sized one. I don't know, I am sure its a great case though. I just want a really snug fit.
     
  10. KC&97TA

    KC&97TA Member

    Joined:
    Jul 17, 2005
    Messages:
    792
    I've been issued several Pelican cases, my last one came new and cut out for the M4+M203 and M9 had slots for 12 rifle mags, 4 M9 mags, little circle cut out for an Otis cleaning kit and a few other little spots for misc items. My first experinces with Pelican was for the DMR, and that thing got tossed off the back of a 5 ton, then thrown into the back of a cargo hummer, Rifle still had a perfect 300 yrd zero, after surviveing 12 weeks in 29 palms and never haveing to re-zero, I was pretty impressed. The throwing of my rifle was when my back was turned, btw. If a Pelican case is Marine Proof, it's good enough for everyday life.

    I have a 1750, I picked it up new off Ebay shipped for $215, think it was called the "box store", they're out of the LA area in CA I think, the guy cuts some great deals, it's a second job for him.

    The Pelican warranty reads somethink like, 'guaranteed for life, but not against shark attack, bears and children under 7' LOL, I got a kick out of it, never had a problem and thier worth thier money in my opinion.
     
  11. Fly320s

    Fly320s Member

    Joined:
    Dec 24, 2002
    Messages:
    1,828
    Location:
    New Hampshire
  12. Lucky

    Lucky Member

    Joined:
    Jul 12, 2005
    Messages:
    2,919
    Location:
    Calgary, near Rocky Mountains - Canada
    Can you buy the materials to mix your own closed-cell foam? That would be very handy. Mix it up, pour it into the case, and then cut the shape out after.
     
  13. Preacherman

    Preacherman Member

    Joined:
    Dec 20, 2002
    Messages:
    13,309
    Location:
    Louisiana, USA
    Lucky, almost as good, you can order pre-cut-to-size closed-cell foam from here. Also, some manufacturers (e.g. Starlight) offer foam "refills" as needed.
     
  14. Pocomoke

    Pocomoke Member

    Joined:
    Jul 22, 2004
    Messages:
    92
    Location:
    MD
  15. Outlaws

    Outlaws Member

    Joined:
    Apr 10, 2006
    Messages:
    2,481
    Location:
    Valley of the Sun
    Ya I saw the Hardigg case. They look good too. Remington supplies one of those with the M-24.
     
  16. wrc

    wrc Member

    Joined:
    Mar 17, 2006
    Messages:
    199
    Location:
    The Land of Pleasant Living
    Adequate foam on the cheap

    Every sewing supply store I've been in has sold large sheets of both dense and light foam in thicknesses from 1-5 inches. I've used the dense foam (green in both the chains I've been in) as the middle layer in cases.

    It's inexpensive enough to slice up and experiment with. It's also good if you want a "form-fit" case that will fit more than one rifle.
     
  17. Lucky

    Lucky Member

    Joined:
    Jul 12, 2005
    Messages:
    2,919
    Location:
    Calgary, near Rocky Mountains - Canada
    Isn't the stuff at sewing shops open-cell? I understood that it would trap moisture and rust your rifle?

    I couldn't resist, and bought some egg-crate anyway though. Good for camping.
     
  18. Ravenslair

    Ravenslair Member

    Joined:
    May 9, 2005
    Messages:
    65
    Here is a really cheap place for Pelicans. I have not ordered from them, but several people I know have. They have been happy.
     
  19. Rembrandt

    Rembrandt Member

    Joined:
    Feb 1, 2003
    Messages:
    3,363
    One of the nicest cases I've seen come from ICC. http://www.icc-case.com/ I ordered their heavier gauge aluminum case and cut my own inserts. Sportsmans Warehouse carries sleeping bag sized sheets of the foam (smooth & egg crate) in their camping department.


    [​IMG]

    [​IMG]
     
  20. Outlaws

    Outlaws Member

    Joined:
    Apr 10, 2006
    Messages:
    2,481
    Location:
    Valley of the Sun
    How does the ICC compare in price to Pelican? They might be on my list for my gun.
     
  21. Rembrandt

    Rembrandt Member

    Joined:
    Feb 1, 2003
    Messages:
    3,363
    Depends on size and thickness of aluminum.....been a while, think mine cost around $250-$300.
     
  22. mrmeval

    mrmeval Member

    Joined:
    Oct 2, 2004
    Messages:
    1,768
    Location:
    Greenwood, Indiana
    Never mind, nothing to see

    Someone beat me to the link so this is a waste of space I can't delete.
     
  23. RalphMalph

    RalphMalph Member

    Joined:
    Nov 2, 2010
    Messages:
    1
    I'm all about the Pelican 1750. It's damn near indestructible, and their warranty is the best you'll find. I know a guy who bought a broken Pelican case for real cheap, then sent it in to Pelican and they replaced it for free (minus shipping).
     
  24. esheato

    esheato Member

    Joined:
    Apr 8, 2003
    Messages:
    2,784
    Location:
    NoVa
    You've done a miracle Ralph....resurrected this thread from the dead. ;)

    Anything Pelican is good stuff.

    Welcome to THR.
     
  25. ctaft77

    ctaft77 Member

    Joined:
    Nov 8, 2010
    Messages:
    1
Thread Status:
Not open for further replies.

Share This Page