Quantcast

Handgun Pictures

Discussion in 'Handguns: General Discussion' started by clance, Aug 12, 2014.

  1. JR24

    JR24 Member

    Joined:
    Aug 16, 2011
    Messages:
    2,615
    Location:
    The center of the mitt
    My daily companion since September.

    20181227_083759.jpg
     
  2. HDX7000

    HDX7000 Member

    Joined:
    Nov 16, 2018
    Messages:
    4
    Location:
    Florida
    163C7520-3CFA-4A19-BA19-7E731A978A38.jpeg Another of my HK pistols
     
    Styx and RA40 like this.
  3. Hookeye

    Hookeye Member

    Joined:
    May 24, 2015
    Messages:
    2,695
    2245 great eight.JPG

    Bought one new years ago, shot it a couple times in IHMSA. Hated the gripframe. Dumped it.
    Found this one, was gonna swap to steel frame..........scoped it, shot decent. But was so bulky I might as well have done up a Contender.
    Gone.

    This is an 8" Davidson's Exclusive 22/45 "Great Eight".

    I like the 6 7/8" taper bull best. Would like a MK2, w MK3 frame..........w a MK1 bbl (whatever it takes to ditch that %$#@ warning label). One the Great Eight 22/45 the warning was underneath. Smaller and w placement, tolerable. Wording of "Great Eight" on top of bbl meant I couldn't cut it down. There were some slab sides maybe of 6 7/8" around (blued).
     
    NIGHTLORD40K likes this.
  4. Pete D.

    Pete D. Member

    Joined:
    Sep 13, 2010
    Messages:
    2,331
    E13E7EC2-6150-44B2-9DEA-EE3BF2CD4151.jpeg F0F193A2-29E5-4F23-BE9A-6D27A1C7D64D.jpeg How about a Baby Bulldog w. Folding trigger in .32 Colt
     
    mope540, sparkyfender, Styx and 5 others like this.
  5. Pete D.

    Pete D. Member

    Joined:
    Sep 13, 2010
    Messages:
    2,331
    View attachment 822214 Have had these on the shelf for a while: .30-06.

    Sorry. Put this in the wrong thread. Moved it (or tried to)

    pete
     
    Last edited: Jan 21, 2019
    NIGHTLORD40K likes this.
  6. Bama59

    Bama59 Member

    Joined:
    Dec 17, 2017
    Messages:
    264
    686-6 +
    0105191552a.jpg 0105191553.jpg
     
    Styx, 22250Rem and NIGHTLORD40K like this.
  7. Michael Tinker Pearce

    Michael Tinker Pearce Member

    Joined:
    Oct 23, 2016
    Messages:
    1,051
    .22 single-shot I made a couple of years back- 7" OAL, 4" Barrel. Fun little plinker, and quite accurate.
    iu2J08G.jpg twwrE0h.jpg
    OAl1qNz.jpg 1VowGBn.jpg
     
  8. NIGHTLORD40K

    NIGHTLORD40K Member

    Joined:
    Mar 17, 2015
    Messages:
    4,259
    Location:
    Nostramo (in absentia), Segmentum Ultima
    Michael Tinker Pearce likes this.
  9. bannockburn

    bannockburn Member

    Joined:
    Apr 24, 2007
    Messages:
    19,919
    Tinker

    Nice single shot! Like the grip design too (sort of reminds me of something Fuzzy Farrant use to make for S&W revolvers).
     
    Michael Tinker Pearce likes this.
  10. Crazybuldr

    Crazybuldr Member

    Joined:
    Feb 1, 2019
    Messages:
    9
  11. NIGHTLORD40K

    NIGHTLORD40K Member

    Joined:
    Mar 17, 2015
    Messages:
    4,259
    Location:
    Nostramo (in absentia), Segmentum Ultima
  12. Crazybuldr

    Crazybuldr Member

    Joined:
    Feb 1, 2019
    Messages:
    9
  13. stonebuster

    stonebuster Member

    Joined:
    Jun 8, 2016
    Messages:
    616
    Location:
    northeast
    That's a fine weapon. It reminds me of mine. IMG_0390.JPG
     
  14. TRX

    TRX Member

    Joined:
    Sep 5, 2008
    Messages:
    1,160
    Location:
    Central Arkansas
    Nice!

    That's a "Systeme Delvigne" gun, like the French Lebel revolver and the later Russian Nagant.

    They were made by half a dozen manufacturers, though Pieper was the only one of consequence other than Lebel and Nagant. Most of them were pretty close to yours, though with conventional trigger guards, though there were some interesting variations. The sliding-cylinder Nagants, of course, and the ones with the side-swinging cylinders, and the Brazilian-contract .44 caliber ones.

    It was a good design, simple and rugged, and variants were in service all over the French Empire as well as in Russia.
     
  15. JR24

    JR24 Member

    Joined:
    Aug 16, 2011
    Messages:
    2,615
    Location:
    The center of the mitt
    Over the years I've owned at least one sig p220, 225, 229, 239, 2022, 250, 245 ... and I think that's it.

    Shame I took so long to actually own a 226, my favorite of the lot. The beavertail and flat SAO trigger just make it perfect for me.
     
  16. SharpDog

    SharpDog Member

    Joined:
    Oct 9, 2006
    Messages:
    2,120
    Location:
    Tennessee
    And we are Legion:

    p226 Legion 20180517_164654.jpg
     
    JR24 and stonebuster like this.
  17. SharpDog

    SharpDog Member

    Joined:
    Oct 9, 2006
    Messages:
    2,120
    Location:
    Tennessee
    Some more Sigs:

    M11A1-raw.png IMG_0001.jpg

    20190302_190323 (1).jpg
     
    Last edited: Mar 2, 2019
    JR24 likes this.
  18. jdavis123

    jdavis123 Member

    Joined:
    Feb 22, 2015
    Messages:
    212
    Location:
    Central Florida
  19. aggie bill

    aggie bill Member

    Joined:
    Mar 14, 2019
    Messages:
    5
    Location:
    W Texas
    I am a hobby gunsmith and I enjoy getting guns and making them work and look good again. I also have modern guns for defense purpose's. I am a new member of this organization and am quite happy with the info here. These are some of my handguns. The SAA at the the bottom is one I had restored by Turnbull Restorations the grips are new fitted walnut the originals are in the picture.
    handguns1.JPG


    handguns2.JPG
    These are a few more. The 1911 at the top is a Tisa's as is the BR9 (a Browning HP clone) which I have customized for carry guns. The 1911 at the bottom is an original 1911A1 by Ithaca in 1944.
    I'll reply again with some more pictures.
     
    Rock185, czhen, 9mmfan and 5 others like this.
  20. aggie bill

    aggie bill Member

    Joined:
    Mar 14, 2019
    Messages:
    5
    Location:
    W Texas
    A few more handguns.
    handguns3.JPG
    The upper left is a Saur&Sohn which a friend found in pieces in the woods an gave to me. I ordered new missing parts and restored it.

    handguns6.JPG
    This my favorite one. An original Colt 1911 from 1918 which somewhere in it's life was finished incorrectly. It is at Turnbull Restoration for a full restore to it's correct finish.
    handguns4.JPG
    Lastly A Moore Belt Revolver, 1862 with it's ammo. The bottom is a Bond Arms "Old Glory" in 45 Colt or 410, it's a great gun in the car.
    Hope you all enjoy.
     
    Spug, czhen, NIGHTLORD40K and 3 others like this.
  21. Michael Tinker Pearce

    Michael Tinker Pearce Member

    Joined:
    Oct 23, 2016
    Messages:
    1,051
    New acquisition- 1915-16 civilian model, nickel-plated. I'm in love!
    ejjRM3D.jpg iITtHkq.jpg
    hWeUHTw.jpg
    It's accurate and quite fun to shoot. I do need to get the correct strippeer-clips; these are from something else (Steyr 1912?) and only hold eight rounds.
     
    mope540, sparkyfender, czhen and 6 others like this.
  22. bannockburn

    bannockburn Member

    Joined:
    Apr 24, 2007
    Messages:
    19,919
    Tinker

    Nice Broomhandle and as you say, quite accurate! Always fancied one of the slightly smaller Bolo models.
     
    Michael Tinker Pearce likes this.
  23. Deltaboy1984

    Deltaboy1984 Member

    Joined:
    Nov 21, 2008
    Messages:
    7,025
    Location:
    Johnson County Texas
  24. Michael Tinker Pearce

    Michael Tinker Pearce Member

    Joined:
    Oct 23, 2016
    Messages:
    1,051
  25. ReconRoninGJR

    ReconRoninGJR Member

    Joined:
    Feb 16, 2019
    Messages:
    3
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice