Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Handloads Versus Boar

Discussion in 'Handloading and Reloading' started by BBDartCA, Sep 28, 2011.

Thread Status:
Not open for further replies.
  1. BBDartCA

    BBDartCA Member

    Joined:
    Jul 7, 2011
    Messages:
    535
    What can be more satisfying than a clean kill with your handloads.

    Took 2 boars in Northern California this weekend with handloads. First a 125 pound sow with 357 Dan Wesson 6" with 180 grain hard cast RNFP with max load of AA #9. At about 20 yards hit it just below the ear and pig dropped instantly. Massive exit wound. Yeah a 22 could probably done the job at this range but it was impressive.

    Second one was at about 100 yards with 30-06 with 180g Partition with max load of IMR 4350. Was a tough hind facing shot betweeen 2 trees on a very steep hill with a moving hog. Hit this one also right below the ear and it also just instantly collapsed. Turned everything inside the neck and around the brain into jello. Yeah using an "Elk Load" on a little pig is overkill. But was lucky that both of these two shots resulted in no meat damage. Good weekend hunting in near paradise.

    Pic of the 30-06 damage below.
     

    Attached Files:

  2. bigedp51

    bigedp51 member

    Joined:
    Jun 4, 2011
    Messages:
    701
    Location:
    Pennsyltucky
    I can make you a deal on a .500 Smith and Wesson Magnum to cook your hogs on and you will be able to keep telling your hog stories over and over to your guests or at least till the smoke gets in your eyes. :D

    BBQ-a.gif

    You can hand load any type wood or charcoal you want in it. ;)
     
    Last edited: Sep 28, 2011
  3. 7even6ix2wo

    7even6ix2wo Member

    Joined:
    Aug 2, 2011
    Messages:
    62
    Location:
    People's Republic of N. Illinois
    biged, that is the almost greatest thing I have ever seen. Where can I get one?
     
  4. Missionary

    Missionary Member

    Joined:
    Sep 8, 2011
    Messages:
    306
    Good morning BBDartCa
    Good work on the elimination of 2 more varmets ! That under the ear shot sure does them in fast.. Tracking deer is not so bad but piggy´s are real low on my list.
    Mike in Peru
     
  5. g29guy

    g29guy Member

    Joined:
    Sep 27, 2011
    Messages:
    21
    Location:
    georgia
    Nice job bbdartca. I'm hoping to try my handloads of hardcast in 10mm this year on white tails I may head down to middle Ga in the off season for some hogs(we can shoot them year round here).
     
  6. 41 Mag

    41 Mag Member

    Joined:
    Jan 22, 2005
    Messages:
    1,824
    Location:
    Texas - Born and Raised
    Your absolutely right. I managed a nice sow Sunday morning at 87 yards with my Raging Bull in 454, shooting my own 300gr RFN GC cast from a Lee mold.

    It was a wonderful sight of rear over ears when the big flat nose impacted, as they were headed out across out back pasture. If I had done a bit more practicing at longer ranges, I would have gotten the other two as well. I have only shot this load out to 50yds, but with the accuracy of it, it is easily capable of a further shot than I am. Least at this point.

    My biggest issue is getting my head around the fact that these things don't drop like "my" mind thinks they should. I held a bit more of a lead as they had on the after burners after the first shot. I was hitting right in front of them but alas, all they got was the breeze as it went by.

    Still a hoot.
     
  7. Hondo 60
    • Contributing Member

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,378
    Location:
    Manitowoc, WI
    BBDartCA:

    Very cool! What can be more satisfying than a clean kill with your handloads?
    I don't know. CONGRATS!!!!

    bigedp51: That is just WOW!!! :D
    I think BBDartCA definitely needs one to cook his hogs
     
  8. splithoof

    splithoof Member

    Joined:
    Dec 26, 2010
    Messages:
    1,053
    Good shooting.
    My hog load from a trusted .30-06 is Federal brass, Barnes 180 TSX bullet, Federal 210 primer, and 44.5 grains of H-4895. A bunch of one-shot kills out to 211 yards, some were taken while they were running. I always shoot them just behind the shoulder, and they drop every time.
    Because the areas that I hunt require use of lead-free bullets, I have found factory loads to be rather expensive. Besides, there is an added level of satisfaction when you craft your own ammunition.
     
  9. BBDartCA

    BBDartCA Member

    Joined:
    Jul 7, 2011
    Messages:
    535
    splithoof, I take it you are hunting in Monterey or Colinga area? Yeah, no-lead is not cheap. But everything I've seen on the TSX expansion is very impressive!
     
  10. splithoof

    splithoof Member

    Joined:
    Dec 26, 2010
    Messages:
    1,053
    Yep, that area exactly, and some times years ago prior at Fort Hunter Ligget (before the legislated condor bullets). Gosh it gets hot up there!
    The TSX has never failed for me. They always sail through, leave a good wound channel, but there is still plenty of great meat for BBQ, crock pot, or whatever you like. Because the TSX (like other copper bullets) are lighter in density, they are a bit longer, so make sure you load them to a length that will function in your rifle.
     
Thread Status:
Not open for further replies.

Share This Page