Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hard lube recipe?

Discussion in 'Handloading and Reloading' started by Netherwolf, Jan 4, 2004.

Thread Status:
Not open for further replies.
  1. Netherwolf

    Netherwolf Member

    Joined:
    Jan 4, 2004
    Messages:
    7
    Hey guys,
    I'm new to this forum. Maybe some will say I have too much time on my hands but I'm kicking around the idea of making my own hard bullet lube. Only problem is, I don't know the ingredients. Anyone out there have a recipe for hard bullet lube?
    TIA,
    Netherwolf
     
  2. 444

    444 Member

    Joined:
    Dec 26, 2002
    Messages:
    8,049
    Location:
    Ohio
  3. HSMITH

    HSMITH Member

    Joined:
    Dec 26, 2002
    Messages:
    4,933
    Welcome to The High Road!!!!!!

    Do a search on the net for "felix lube cast bullet" and you will find the recipe for Felix lube. It is quite specific in recipe and preparation but works VERY VERY well, better than any commercial lube I have tried for sure. I took the liberty of changing it up a little last time and my modified Felix lube is outstanding also. The important part is not getting the lube too hard or it won't flow at low speeds and pressures. Beeswax is the real key, it flows well and gets the lube to the bore. Unless transporting bullets by mail, extreme high temperature storage or shooting or something else that requires a hard lube I do not recommend nor use a true "hard" lube. Soft lubes are easier to apply, and in most all cases work better. Make your lube just hard enough to prevent it being messy and you are there.

    Hope this helps!
     
  4. Steve Smith

    Steve Smith Moderator Emeritus

    Joined:
    Dec 21, 2002
    Messages:
    4,394
    Location:
    Southeastern US
    I also like the Felix lube. I made my first (huge) batch too hard, and had to heat the luber. Next time I won't add paraffin at all.
     
  5. Netherwolf

    Netherwolf Member

    Joined:
    Jan 4, 2004
    Messages:
    7
    Hey guys,
    Thanks for the fast replies. Not slamming anyone but I had this topic on another forum for 3 weeks without a single hit. I'll check out the suggestions provided thus far but, in the meantime - the more replies/leads the better.
    Thanks again,
    Netherwolf
     
  6. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    22,793
    Paul "Fitz" Jones says he will furnish the secret formula for SAECO green bullet lube. As I recall, it is largely paraffin wax and STP, with some green dye. I don't recall the proportions though. Drop him a wire.
     
  7. Netherwolf

    Netherwolf Member

    Joined:
    Jan 4, 2004
    Messages:
    7
    Jim,
    The recipe for SAECO green bullet lube sounds like what I'm looking for. My ol' lady is a sales consultant for a major candle company & I'm a pack rat which means I've got scrap candle wax up the butt that I can't bring myself to throw away. So, who is "Fitz" Jones & how do I contact him?
    Netherwolf
     
  8. HSMITH

    HSMITH Member

    Joined:
    Dec 26, 2002
    Messages:
    4,933
    Nether, look at the top of the main Handloading and Reloading page, he is a Moderator in this forum.
     
  9. Netherwolf

    Netherwolf Member

    Joined:
    Jan 4, 2004
    Messages:
    7
    e-Mail sent to Fitz. Thanks for all the replies. All other info/ideas welcome.
    Netherwolf
     
  10. NavajoNPaleFace

    NavajoNPaleFace Member

    Joined:
    Nov 7, 2003
    Messages:
    566
    Location:
    Too Dang Hot, Arizona
    I'm not trying to be nosey but wouldn't bee's wax (being softer and more pliable and workable) be a better substitute for candle or parafin wax?

    I realize that bee's wax is a little more expensive but it was just a thought.

    Then I guess it would depend on the entire recipe that would determine if a softer or harder wax would work best.
     
  11. Steve Smith

    Steve Smith Moderator Emeritus

    Joined:
    Dec 21, 2002
    Messages:
    4,394
    Location:
    Southeastern US
    FWIW, John Linebaugh told me that he thinks the wax from toilet bowl rings is about the best lube you can get. It's not hard, but a good lube.
     
  12. P95Carry

    P95Carry Moderator Emeritus

    Joined:
    Jan 3, 2003
    Messages:
    16,341
    Location:
    South PA, and a bit West of center!
    Now that is most interesting Steve .. funny really, when I built our new bathroom in 2002, I did think as I installed the ring .... just how much it looked like a good bullet lube!!

    Never tried it of course but it does get me to thinking for sure. Main problem I guess could be getting it into the lubrisizer .... those pre-formed ''rods'' of lube with a hole down the middle are so very convenient!
     
  13. kentucky bucky

    kentucky bucky Member

    Joined:
    May 25, 2003
    Messages:
    607
    Location:
    Eastern Kentucky
    I've heard that toilet bowl rings aren't really good for black powder guns and/or muzzleloaders though. Something about petroleum products in the wax. I don't think it's real beeswax....just made to look like it. Smokeless wouldn't be a problem though.
     
  14. onecruiser

    onecruiser Member

    Joined:
    Sep 29, 2003
    Messages:
    34
    Location:
    Cape Cod
    toilet bowl rings

    I tried different formulas for years but saw the beeswax ingredient on the toilet bowl rings and have used it ever since. It's big time cheap. You simply cut off 3 inches or so, open your sizer, slide it in and when you replace the plunger, it puts the hole in the middle automatically. No fuss no muss.

    The bad news is that lately in an attempt to save money some manufacturers are not using beeswax, the good news is, whatever they are using it works just as well.
     
Thread Status:
Not open for further replies.

Share This Page