Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Has anyone had experience with Boyd stocks?

Discussion in 'Rifle Country' started by Sniper4Life, Dec 7, 2006.

Thread Status:
Not open for further replies.
  1. Sniper4Life

    Sniper4Life Member

    Joined:
    Nov 17, 2006
    Messages:
    325
    Location:
    Peoples Republic of Virginia
    Has anyone had experience with Boyd stocks? I am replacing a stock and was considering their target/varmit stock. Are these good stocks?

    Here is a link Boyds stocks
     
  2. Banshee

    Banshee Member

    Joined:
    Sep 24, 2006
    Messages:
    88
    Location:
    East Tennessee
    I've used a couple of their shotgun stocks, fit real nice. I have never tried one of their rifle stocks..
     
  3. Duckbill

    Duckbill Member

    Joined:
    Nov 21, 2006
    Messages:
    34
    I think they're great stocks for the money. I've done two of them and was pleased with both.
     
  4. NailGun

    NailGun Member

    Joined:
    Aug 16, 2006
    Messages:
    274
    Location:
    Gone fishing....
    My son used to work there, running a laser checkering machine.
    I have been in their manufacturing facility, and can say that they are a first class plant with very skilled employees, and they make a first rate product. Quality and customer satisfaction are job one.
    NailGun.
     
  5. freedomlover

    freedomlover Member

    Joined:
    Jan 1, 2003
    Messages:
    76
    Location:
    Hurricane Alley
    Got a Boyd's JRS Classic VIP stock last year for my old Mauser, it needed a little inletting just like they said, I'm very pleased with the quality. Gave them a call for some advice on the inletting, and they were extremely knowledgeable, helpful and courteous. Good people!
     
  6. jlmurphy

    jlmurphy Member

    Joined:
    Apr 1, 2006
    Messages:
    209
    I have that particular stock on three rifles, wouldn't hesitate to buy another.
     
  7. dakotasin

    dakotasin Member

    Joined:
    Dec 26, 2002
    Messages:
    4,777
    Location:
    Transient
    i have one on a custom mauser. its ok, and for the money it is pretty good. probably won't buy any more, though - just not that impressed w/ 'em.
     
  8. USMCRotrHed

    USMCRotrHed Member

    Joined:
    Dec 16, 2005
    Messages:
    176
    Location:
    Oklahoma
    I put one of their stocks on one of my Garands. It was a dead on fit right out of the box. Looks great, but (as I was aware) it is a little bulkier than the "stock" stock. I'm satisfied!
     
  9. Deles136

    Deles136 Member

    Joined:
    Dec 29, 2002
    Messages:
    214
    Location:
    Lower SC
    I have used two of their M1 Garand stocks and I think they are great. Easy to install and look great.
     
  10. GreyMauser

    GreyMauser Member

    Joined:
    Apr 25, 2006
    Messages:
    125
    Location:
    SW Florida
    I have two, both JRS, both on bolt actions. One is laminated, and was checkered after I finished it. Looks and works real well. The other is plain walnut, also a "Virtual Inlet". Both took a little work to complete the inletting and shape. The price, about $75 for the plain walnut, was right and it was delivered to me in 10 days.
     
  11. longrifleman

    longrifleman Member

    Joined:
    Feb 11, 2004
    Messages:
    849
    Location:
    western Missouri
    I replaced a Bubba'd P17 with one of their's a few years back and it was exactly as advertised. Minimal fitting and the wood was good.
    I have a thumbhole stock on order right now to replace a plastic stock on a Howa I traded for a while back.
     
  12. Smokey Joe

    Smokey Joe Member

    Joined:
    Jan 2, 2003
    Messages:
    2,617
    Experience is the best teacher.

    Mine with Boyd's echoes most of the above posters. Put one of their laminated varmint stocks on a Yugo M-48 Mauser.

    When this project was being done, Boyd's was just tooling up for the Yugo, so it seemed the wait was interminable. But when they finally shipped the stock, it was WELL worth it IMHO.

    Bought the "Unfinished" version (means not varnished--the shaping was completely done! :D ) which I'd advise to anyone. These stocks almost always need a little tweaking with a Dremel tool, and anyhow, I wanted to glass-bed mine.

    If you're lucky, and your rifle just drops into the stock, and you're not glass-bedding it (a strategic error IMHO) you can still pick the finish YOU want rather than going with the Boyd's finish, plus save a couple bucks. So go with the unfinished stock, always.

    After glass-bedding, the stock got abt. 8 coats of cheap local hdwe-sto spray-can spar varnish, with LOTS of sanding before and between coats. Frankly the sanding is the most tedious part of the entire process.

    The Boyd's people were VERY helpful over the 'phone and by e-mail, in getting me the exact right stock for my rifle and my wants. 'Phone is on your nickel, but you're the one wanting the advice.

    My rifle looks better than I felt I had any right to expect. Nice 'n' accurate, too.

    I'd go with a Boyd's stock again in a heartbeat. Contact info: Website: www.boydsgunstocks.com Mail: Boyd's Gunstock Industries, Inc. 25376 403rd Ave. Mitchell, SD 57301 'Phone: (605)996-5011 Fax: (605)996-9878

    They'll send you their catalogue for the asking.

    Good luck on your project.
     
Thread Status:
Not open for further replies.

Share This Page