Have you purchased anything gun related in the last three days?

Discussion in 'General Gun Discussions' started by If1HitU, Oct 18, 2018.

  1. Targa

    Targa Member

    Joined:
    Oct 22, 2019
    Messages:
    1,210
    It was a nice surprise to find them. The Pachmayr’s did a great job for what they were suppose to do but rubber grips on a revolver is just a hard pill for me to swallow. I stumbled across these and thought I would give them a try.

    You can see that there is a bit of a space between them and the base of the grip frame that I would prefer not be there but other than that I like the way they look.
     
    Legionnaire likes this.
  2. NR53

    NR53 Member

    Joined:
    Jul 10, 2017
    Messages:
    421
    Location:
    Missouri
    Ordered 2K more .224 dia. 69gr HPBT from RMR

    Also ordered a fluted stainless .223 Wylde 18 inch barrel from Ballistic Advantage for my next build.
     
    allisd17 and stillquietvoice like this.
  3. DTL

    DTL Member

    Joined:
    Feb 20, 2021
    Messages:
    522
    A DeSantis Mini Slide holster for my Shield Plus, ordered a SA XDS Mod 2 OSP 4" with the CT optics.
     
    NR53 and aaaaa like this.
  4. Choctaw

    Choctaw Member

    Joined:
    Sep 6, 2005
    Messages:
    1,394
    Location:
    Texas-Along the Preston Trail
    Yesterday I bought a new AR stock, a Ruger Blackhawk 357 mag and a TC Renegade in 50 cal. I have an eclectic taste in firearms. :D
     
    allisd17, NR53, Frulk and 2 others like this.
  5. stillquietvoice
    • Contributing Member

    stillquietvoice Contributing Member

    Joined:
    Feb 25, 2016
    Messages:
    2,814
    Location:
    Upstate ny
    Just received my order from rmr and midsouth 69 gr hpbt 224. ND 240 140 bthp 3 gun hunter in 6.5mm. They were both here when I got home from work.
     
    NR53 likes this.
  6. BigBlue 94

    BigBlue 94 Member

    Joined:
    Dec 5, 2018
    Messages:
    3,270
    Location:
    The Great American Prairie
    Been looking at 6.5 Grendel barrels for my original T/C Contender lately. Was pretty set on SSK, but they were out of stock. Could custom order one but it was more expensive. Was just browsing google when up pops Graf's with an SSK 20" stainless barrel in 6.5 Grendel. I wanted a blued one since all of my contender stuff is blued, but hey, i like two tone guns too. And it was the last one in stock! I snatched it up quick.
     
    NR53 likes this.
  7. plainsdrifter

    plainsdrifter Member

    Joined:
    Jun 3, 2021
    Messages:
    366
    Just for fun. .177 cal pellet pistol.

    41kBEHVgL+L._AC_SY1000_.jpg PT-85 Blowback CO2 Powered Air Pistol
    Semi-Automatic CO2 Powered with Blowback Action
     
    Last edited: Jul 8, 2022
  8. Scout21

    Scout21 Member

    Joined:
    May 8, 2019
    Messages:
    501
    Location:
    99 New York Avenue, NE Washington, DC 20226
    Bought 24 rounds of old paper shells for $5.50. Had 21 Federal Hi-Power and 3 Remington Express in the box. Posted a thread in Shotguns trying to figure out when they were made, the Federal seems to be '63-'65. Pretty cool, never owned or shot paper shells before.

    PXL_20220708_190539949.jpg shellllsss.jpg shell.jpg
     
  9. horsemen61

    horsemen61 Member

    Joined:
    Oct 20, 2011
    Messages:
    6,132
    Scope rings for a new to me scope only problem is they are to Low the scope hits the rifle which won’t work so I have to take them back to bass pro and exchange them!
     
    NR53 and Scout21 like this.
  10. 1976B.L.Johns.

    1976B.L.Johns. Member

    Joined:
    Feb 4, 2015
    Messages:
    1,939
    Location:
    Northern Minnesota
    Solvents, bore brushes and lubricants* today.

    * No, not olive oil as that would upset Popeye.......:confused:
     
  11. Insignificant bill

    Insignificant bill Member

    Joined:
    May 2, 2019
    Messages:
    1,016
    More Federal AutoMatch 22lr at Walmart
     
  12. Frulk

    Frulk Member

    Joined:
    Nov 26, 2018
    Messages:
    1,086
    On the way home from my mother's house in eastern Washington I dropped in a small-town gun shop off the beaten track and picked up these...158 grain .357 and .44 mag 240 grainers both with gas checks. Local caster sells them in the shop via consignment. Price wasn't bad...unfortunately there were no primers or Unique/Trailboss on the shelf....better luck next time.

    I3W2N5S.jpg

    As luck would have it the screws I ordered from Ruger showed up yesterday. I'm replacing all the old-style straight blade screwdriver screws with Rugers Torqx screws. I bought all of these for the price shown. On Midway USA they were $3.99 EACH...So, that would have been $159.60 without tax and shipping vs the Ruger price of $38.00 DELIVERED. That was an easy choice to make.

    8tcWfe6.jpg
     
    Last edited: Jul 9, 2022
  13. HarryB

    HarryB Member

    Joined:
    Dec 25, 2002
    Messages:
    394
    Location:
    Valley of the Sun
    Streamlight TLR-1 light for my P226
     
    NR53 and Insignificant bill like this.
  14. Frulk

    Frulk Member

    Joined:
    Nov 26, 2018
    Messages:
    1,086
    I got back from my mother's yesterday after an approximate 800-mile drive in the truck. Even though it was getting into the 90's here in the early AM I wasn't in the mood to be inside a vehicle again. Elected to ride the Harley (42-45 mpg vs the P/U's 15 mpg around town). Was buying some small things and knew they would fit in the hard bags.

    First stopped by Tandy Leather and picked up a couple of bags of leather scraps for $5.99 each. I'm always using leather scraps for various projects in the reloading room (vice buffer for clamping onto barrels etc) and had been meaning to pick some up for a while.

    Also stopped by the local gun shop and picked up .22Mag ammo I had been burning through with the Keltec PMR30. They removed the purchase limit, so I bought 6 of the 7 on the shelf and left one for the next customer.

    I'm still working on a protracted project to scope some rifles I've had in the inventory for a while. Next up was the M1A Scout. Prior to heading out to run around today I looked at a few reviews of red dots and this one REALLY stuck out for the quality of the video production and the sheer abuse the scope was put through over an extended period of time. Halfway through the video I knew I was going to buy it and give it a try. If it didn't work out for me on the M1A I have other rifles it might be a good fit for.



    Today's haul:

    McaGndu.jpg

    The scope was $299 out the door and is already on the M1A and waiting to be sighted in.

    rgjOclT.jpg

    xgpseld.jpg
     
    Last edited: Jul 9, 2022
  15. 1976B.L.Johns.

    1976B.L.Johns. Member

    Joined:
    Feb 4, 2015
    Messages:
    1,939
    Location:
    Northern Minnesota
    or for seed.
     
    Frulk likes this.
  16. LonewolfMcquade

    LonewolfMcquade Member

    Joined:
    Jan 31, 2022
    Messages:
    154
    Sig Custom P320
    20220710_190452.jpg 20220710_190505.jpg 20220710_190424.jpg
     
  17. Mogas
    • Contributing Member

    Mogas Contributing Member

    Joined:
    Nov 2, 2021
    Messages:
    123
    Location:
    Mountain Home Arkansas
    We had a gun show this weekend here at the fairgrounds. Scored a very clean K31 swiss and a CZ 52. I got tons of brass and dies for the K31 but learning about the CZ 52 pistol. Took it apart and slugged the barrel. Really interesting roller block action...
     
  18. allisd17

    allisd17 Member

    Joined:
    Feb 9, 2015
    Messages:
    238
    Location:
    Mountain West
    Picked up a new Savage Mk II, .22LR heavy barrel. Mounted a Burris Droptine 3-9x40 today. Wife and I hope to take it to the range tomorrow.
    IMG_20220711_155623529~2.jpg
     
  19. Scrod314

    Scrod314 Member

    Joined:
    Aug 10, 2020
    Messages:
    364
    Local gun shop had PMC brass 5.56 for $11 a box after tax. I bought 200 rounds.
     
    CoalCrackerAl and 1976B.L.Johns. like this.
  20. sevt_chevelle

    sevt_chevelle Member

    Joined:
    Oct 23, 2012
    Messages:
    818
    Location:
    Wisconsin
    Got a Colt king cobra on friday. So far it plays nice with the anaconda.
     
    1976B.L.Johns. and allisd17 like this.
  21. BushMaster-15

    BushMaster-15 Member

    Joined:
    Oct 11, 2012
    Messages:
    395
    Location:
    Planet Earth
    OH heavens YES :D
     
  22. M16_A1 Retro

    M16_A1 Retro Member

    Joined:
    Jul 11, 2022
    Messages:
    4
    Location:
    DFW, TX
    Just ordered 30 Okay 20-round magazines since Okay Industries is stopping production at the end of the year.
     
  23. Scrod314

    Scrod314 Member

    Joined:
    Aug 10, 2020
    Messages:
    364
    Blue Force Gear Vickers Combat Applications 2 sling.
     
  24. CoalCrackerAl

    CoalCrackerAl Member

    Joined:
    Jan 29, 2021
    Messages:
    3,756
    Location:
    Shamokin/Coal twp Pa.
    2 50 count federal 17hmr and 2 125 count cartons of CCI Maxi mags.
     
  25. Walkalong

    Walkalong Moderator Staff Member

    Joined:
    Nov 20, 2006
    Messages:
    72,809
    Location:
    Alabama
    EC Tuner finally came in.
    IMG_8772.JPG
    IMG_8778.JPG
     
    horsemen61, Mogas and LonewolfMcquade like this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice