Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help locating LEE keyed die adapters

Discussion in 'Handloading and Reloading' started by Matt304, Mar 1, 2010.

Thread Status:
Not open for further replies.
  1. Matt304

    Matt304 Member

    Joined:
    Sep 19, 2006
    Messages:
    624
    Location:
    Utica, IL
    I have the LEE Classic cast 50BMG press. It has 1-1/4" threads. The BMG kit came with thread bushing adapters that thread into the 1-1/4 threads, then keyed bushings with 7/8" threads rotate and lock into those. This makes swapping dies much faster and easier and I really like them.

    I'm about to place a web order, I and I have no clue what these locking adapters are called, and what manf part numbers are used for them. I want to order a few extra for the 7/8" dies I have to quick-change while loading.

    Can anyone link me to these locking bushing adapters, and hopefully the part numbers as well?

    I would really appreciate that.

    Thanks
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
  3. Matt304

    Matt304 Member

    Joined:
    Sep 19, 2006
    Messages:
    624
    Location:
    Utica, IL
    Thanks RCModel.

    You made me realize that I don't actually have the LEE set. Mine do not have threads on the outside, but lugs.

    When I spotted a picture, I knew that it was the Hornady ones I own, not the LEE. This is them:

    [​IMG]

    Thanks again
     
Thread Status:
Not open for further replies.

Share This Page