Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help me out!

Discussion in 'Rifle Country' started by lehmanM7, Aug 10, 2007.

Thread Status:
Not open for further replies.
  1. lehmanM7

    lehmanM7 Member

    Joined:
    Aug 10, 2007
    Messages:
    12
    Hello, I Have a ruger 10/22 and it has a firing problem. When I am using it it only fires once and that is when u put a new clip in and you let the slide close hard. or i only shoot one bullet at a time and load it manualy. I know that it is not a clip problem because after it shoots the first shot it loads the second. Do you have any suggestions on what is wrong with my rifle? Also can you tell me how to fix it.
     
  2. 41magsnub

    41magsnub Member

    Joined:
    Jul 10, 2007
    Messages:
    1,791
    Location:
    Missoula Montana
    Before the smart people jump in.. When is the last time you took the gun apart (including pulling the bolt out) and cleaned it? A dirty 10/22 jams and miss feeds like crazy which I learned the hard way back in high school when I bought mine.

    Also, what ammo are you using? Have you tried something different?

    Another also.. I realize you don't think it is the magazine but have you tried another one? What magazine are you using?
     
  3. lehmanM7

    lehmanM7 Member

    Joined:
    Aug 10, 2007
    Messages:
    12
    ummm quite a while ago.....but i have use federal and remington ammo
     
  4. Ifishsum

    Ifishsum Member

    Joined:
    Jun 21, 2005
    Messages:
    942
    Location:
    Portland, OR
    Dirty chamber not causing the round to be fully seated?
     
  5. lehmanM7

    lehmanM7 Member

    Joined:
    Aug 10, 2007
    Messages:
    12
    ok thank you i will try cleaning that out
     
  6. lehmanM7

    lehmanM7 Member

    Joined:
    Aug 10, 2007
    Messages:
    12
    Thank You

    hey guys thank you sooo much for those who helped me it works now!!!....there was a loose bolt and i tightyened that up and then cleaned out the whole gun piece by piece.
     
Thread Status:
Not open for further replies.

Share This Page