Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help me spend some money on my first repro revolver

Discussion in 'Blackpowder' started by Geneseo1911, Jan 7, 2011.

Thread Status:
Not open for further replies.
  1. Geneseo1911

    Geneseo1911 Member

    Joined:
    May 6, 2005
    Messages:
    1,016
    Location:
    South of I-80, PR of IL
    Gentlemen-
    I received a Cabelas gift card as a going-away present from my old job, and I have decided it is a good chance to try out black powder revolvers. I have read the stickies, and from that I have made a few decisions, but I want to see if you all have any more advice before I jump in.

    What I know:
    -I want the 1858 Remington New Army, steel frame, 8" bbl.
    -I want to use real black powder; I'm still determining a source, but I think I've seen it in my LGS
    -I need to build a reloading stand & buy another tool box.

    Things I need advice on:
    -are the Cabela's kits worth the $50? It seems they leave out a few things, and that you are likely paying a premium for the balls & wads they come with.

    -How does one determine to use #10 or #11 caps? trial & error? Are all cap brands interchangeable like metallic primers, or unique like shotgun primers?

    -What type/brand of capper do I want?

    -What type/brand of powder flask and/or measure do you guys like? Source?

    -How many of you use wads under vs just grease over the ball?

    -commercial grease (bore butter, etc.), Crisco, rendered fat from your last brisket, or homemade mix?

    -what spare parts are worth keeping on hand for the Pietta Remmy, in case they cease production, or teotwawki? I doubt I'll shoot the thing enough to wear it out, but one never knows. If I really get bit, I think I'd probably invest in a Ruger Old Army.

    -any other tips for a beginner?
     
  2. BConklin

    BConklin Member

    Joined:
    Dec 19, 2010
    Messages:
    78
    Assuming you haven't already, ask at your local gun shop for black powder. Just because they don't have any on the shelf doesn't mean they don't carry it. They'll keep it in a special magazine in the back room. I was thrilled to find my local gunshop carries Goex. I was in there several times before I thought to ask. :banghead:
     
  3. TwoWalks

    TwoWalks Member

    Joined:
    Dec 21, 2010
    Messages:
    8
    I recently purchased an 1860 army from Cabela. I did not get the starter kit, not so much because of the price but the amounts of each item contained in the kit. 30 balls would only allow me to reload six times and the same applies for the wads.

    Now you would need to look at each of the items on your list and realize, they each would be a matter of personal preference.

    Suggestions:
    Begin with bore butter
    Use felt wads and see what you prefer.

    The capper would be another personal choice. A lot of smaller fingered people place the cap by hand. Most cappers are a pain in the back side in my own opinion, but do to having thick fingers as well as head, I use a straight line capper.

    Before purchasing, check a reasonable distance around where you live to see if you will be able to purchase caps, powder and balls.

    These are just quick random thought off the top of my head and do not apply to everyone - perhaps not to anyone but myself.
     
  4. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    Where did you get the notion that shotgun primers are unique? 209 primers are the standard for shotguns and are no more unique than rifle or pistol primers.
    BTW, you will have to use trial and error to determine what size/brand of caps work best for your gun. A proper fitting cap is the primary key to preventing chain fires.
     
  5. skipjack

    skipjack Member

    Joined:
    Sep 11, 2006
    Messages:
    183
    Location:
    Maryland USA
    I like the universal capper by Ted Cash. It holds a hundred or so
    caps, and is very easy to use. I got mine from the Possible Shop,
    but there are other sources available online.

    http://www.possibleshop.com/s-s-cappers.html

    You may have to gently file the end to fit your gun. I did for
    my Colt 51 Navy.

    As far as caps go, you will probably need to try 10 and 11.
    Unless, of course, you buy a set of Ampco nipples, which are
    designed for a size 11 cap. I have them in both my Navys, and
    they are real nice.

    For a flask, I like the Pedersoli colt style flask, with a spout that
    throws a pre-determined charge. The spouts can be ordered
    in different sizes to throw different charges, and can be shortened
    to customize whatever charge you care to use.

    I use wonderlube over the seated ball, finding it cheaper and easier
    than using felt wads. I like a lot of lube, and can shoot many
    cylinders of loads before fouling becomes a factor.


    Good luck and good shooting!
     
  6. mykeal

    mykeal Member

    Joined:
    Sep 9, 2006
    Messages:
    5,147
    Location:
    Michigan
    IMHO, no. Buy just what you need, and in sufficient quantities to make the shipping worthwhile.

    Trial and error, unless you want to go to the expense of replacing all 6 nipples at $5 each. Less expensive to buy caps and experiment than replace nipples.

    Cap sizes are a crap shoot. They are not interchangeable between brands, and may even vary between lots within a given brand. You don't get 3 decimal place precision for 4 cents apiece. Here are the results of some measurements I made, at least 20 samples of each brand and size:
    CapSizes.jpg
    Others have made similar measurements and gotten similar, but not exactly the same, results, so bottom line: it's a crap shoot. Did I mention that it's a crap shoot?

    The Ted Cash cappers are about as good as you're going to find. However, the Remington NMA is notoriously difficult to cap using a capper, as the space the nipple fits in is very small. The in-line cappers are the only ones that fit and even those may need some file work. Brand? Whatever.

    Source - any one of the sutlers can provide a good unit. I'll say Track of the Wolf, but Cabela's, Dixie Gun Works, The Possible Shop, etc. etc. all have good units. Brand - not much to tell them apart, so you really don't have anything to lose. Get a large one.

    It's probably 50/50. I use dry lubed wads. Wonder Wads is a good brand, but many folks make their own using Durofelt and Ballistol or a homemade lube mix.

    No comment.

     
  7. Fingers McGee

    Fingers McGee Member

    Joined:
    Apr 5, 2009
    Messages:
    1,526
    Location:
    High and dry at Lake of the Ozarks, MO
    What Mykeal said +1 except, I use lubed wads between ball and powder, usually made by someone else and cheaper than Wonder Wads. Bore Butter to lube the Arbor on a Colt style revolver. They will shoot all day that way.

    FM
     
  8. Geneseo1911

    Geneseo1911 Member

    Joined:
    May 6, 2005
    Messages:
    1,016
    Location:
    South of I-80, PR of IL
    junkman, you must not be a shotgun reloader. Different brands of 209 primers have very different characteristics, and are not interchangeable. A given load that calls for a specific brand can be dangerously over pressure with another brand. You'll also find some brands are slightly different sizes. Once I put Cheddite primers into a hull, Win., Rem., & CCI won't stay in the pocket. I agree that it does not matter in an inline muzzleloader, however. Usually.

    Thanks for all who have commented so far, please keep it coming.
     
  9. junkman_01

    junkman_01 member

    Joined:
    Aug 7, 2009
    Messages:
    1,728
    Location:
    Florida
    My point was that shotgun primers are NO MORE unique than other primers or caps.
     
  10. arcticap

    arcticap Member

    Joined:
    Mar 20, 2005
    Messages:
    6,185
    Location:
    Central Connecticut
    Without going too far out on a limb, many folks have mentioned that they prefer to use the Remington #10's with the Pietta 1858 factory nipples.
     
  11. BHP FAN

    BHP FAN Member

    Joined:
    Sep 23, 2008
    Messages:
    5,810
    Location:
    Northern California
    Remington #10's or CCI #11.
     
  12. Jaymo

    Jaymo Member

    Joined:
    Aug 21, 2010
    Messages:
    3,530
    I've used CVA patch lube, TC bore butter, and crisco in my Pietta '58 Remington, Pedersoli Howdah, CVA Colonial, and TC Renegade. So far, they've all worked equally well.
    I've also used my own home made patch/bullet lube. My home made is a good hot weather lube, because it's not as soft as the other 3.
     
  13. ontarget

    ontarget Member

    Joined:
    Nov 30, 2009
    Messages:
    695
    Location:
    Michigan (Gods country)
    All good advice. The best part of BP shooting is that it is a very personal sport. We all have a different preference for everything. Yes we do agree on this or that but none of us share the exact same technique, pet load, cleaning practices, wads, lubes, etc. Start with the advice here and tweak it as your experience grows. Have fun and keep us posted, maybe you will introduce us to something new.
     
  14. Sniderman

    Sniderman Member

    Joined:
    Dec 18, 2010
    Messages:
    204
    Location:
    The Republic of Vermont
    Good advice here,, It really is an individual sport.
    One thing I would advise when burning BP in a revolver is to make yourself a short cleaning rod with a bronze brush on it. I have one and it's one of the first things that I get out of the shooting bag. With six rounds per loading, your barrel will foul rather quickly and the rod will make it easy to clean out the fouling between reloads.
    Have fun!
     
  15. cad4340

    cad4340 Member

    Joined:
    Aug 15, 2008
    Messages:
    7
    Location:
    Puyallup, WA
    Wow, lots of good info here. For what it's worth here's my $0.02 worth.

    My first foray into BP was an 8" Uberti 1858 Remington replica I got from Cabelas. It's still one of my favorites and a beautiful shooter so you're off on the right foot.

    I use 20-25 grains of Goex FFFg with Wonderwads and Hornady .454 round balls and have never been disappointed.

    Unless you plan on carrying extra, pre-loaded cylinders, I'm not sure I'd spend the money on a loading stand. It's really just as easy to load the cylinder while it's on the gun.

    Don't spend the money on the Cabelas Starter Kit. It has things you don't need (powder measuring tool, bore lube, a crappy nipple wrench, etc.) and doesn't have things you do need (Wonderwads, cleaning supplies, a good nipple wrench, etc.). BTW, a good nipple wrench is not to be confused with a well executed titty-twister.

    Do some research and get a good powder flask that throws the correct # of grains for your application and preference. Don't get the plastic CVA one from Cabelas. It's a real POS.

    All of the Bore Butter type products, while they may work well, are just a greasy, nasty mess. You get the same results with the pre-lubed wads without having to carry a rag to wipe your hands on.

    Other than that, just remember to give the caps a pinch to help them hold onto the nipples a bit better and clean the gun immediately after use.

    Have a great time. BP is lots of fun and always a crowd pleaser at the range. Drop me a line when you're ready to step up to a 20 ga. Howdah. That's an attention getter.
     
  16. martysport

    martysport Member

    Joined:
    Jan 16, 2011
    Messages:
    68
    Location:
    Frogland
    I find the RWS1075 caps a good fit on my Pietta 1858 :)
     
Thread Status:
Not open for further replies.

Share This Page