Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help on choke tube marks/notches

Discussion in 'Shotguns' started by 10mmman, May 20, 2004.

Thread Status:
Not open for further replies.
  1. 10mmman

    10mmman Member

    Joined:
    Jan 28, 2003
    Messages:
    32
    Location:
    Iowa
    I need to make sure I have the markings down for some choke tubes I have- is:

    1= Full
    2=IM
    3= Mod
    4=IC
    5= Cylinder?

    What is skeet I & II marked?

    This also goes for marks on a barrel (ie an old A-5 w/ 1 star=Full) don't it?

    TIA!

    X
     
  2. kudu
    • Contributing Member

    kudu Moderator Staff Member

    Joined:
    Jul 17, 2003
    Messages:
    2,731
    Location:
    north central indiana
    Different manufacturers have different marks for their chokes. What do you have?
     
  3. 10mmman

    10mmman Member

    Joined:
    Jan 28, 2003
    Messages:
    32
    Location:
    Iowa
    Benelli, Browning and Remington..

    But the one that stumps me is a Stoeger tube mark.

    X
     
  4. kudu
    • Contributing Member

    kudu Moderator Staff Member

    Joined:
    Jul 17, 2003
    Messages:
    2,731
    Location:
    north central indiana
    My rem chokes don't even have notches in them, they have the choke printed on the side, but the Beretta seem to be in line with what you have posted. Straight skeet choke doesn't have any notches at all, and I don't believe that they discern between sk1 and sk2 chokes. They can be had but I haven't seen them offered by Beretta.

    IIRC the Ruger chokes also have the same notches but I would have to dig through a bunch of shooting bags to be sure.
     
Thread Status:
Not open for further replies.

Share This Page