Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help!! please, lever dropping on my Winchester 94 dropping

Discussion in 'Rifle Country' started by blainer, Dec 24, 2011.

Thread Status:
Not open for further replies.
  1. blainer

    blainer Member

    Joined:
    Dec 24, 2011
    Messages:
    2
    I would appreciate some feed back on how to correct the dropping of my lever on a Winchester 94 45 LC Trapper. The lever keeps falling down.
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    There is a friction Stub & Spring (3794X & 3894X) in the link (4994X) that drops out of the bottom of the receiver when you open the lever.

    http://www.urban-armory.com/diagrams/win94post.htm

    It snaps into a recess in the receiver bottom when the lever is closed to keep it closed.

    I would guess the plunger is stuck with dried oil & dirt, or the spring is broke.

    rc
     
  3. blainer

    blainer Member

    Joined:
    Dec 24, 2011
    Messages:
    2
    I will try that right away

    Thanks very much I will try that right away.
     
Thread Status:
Not open for further replies.

Share This Page