Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help with 9mm and 40s&w load

Discussion in 'Handloading and Reloading' started by abj69jp3, Feb 20, 2012.

Thread Status:
Not open for further replies.
  1. abj69jp3

    abj69jp3 Member

    Joined:
    Feb 20, 2012
    Messages:
    2
    Location:
    Raleigh, NC
    I have HP-38 and WST powder looking loads for a precision delta 115 FMJ 9mm and also precision delta 165 FMJ 40s&w . Can't find much data for WST Powder. Thanks for the replys.
     
  2. J_McLeod

    J_McLeod Member

    Joined:
    Nov 21, 2010
    Messages:
    1,541
    Location:
    Homestead, FL
  3. bds
    • Contributing Member

    bds Member

    Joined:
    Jan 10, 2010
    Messages:
    15,102
    Location:
    Northwest Coast
    +1. My 9mm reference load is 115 gr Winchester FMJ with 4.8 gr W231/HP-38 loaded at 1.135" OAL.

    Current Hodgdon load data:
    1999 Winchester load data:
    There is no current published load data for 9mm and WST nor in 1999 Winchester load data.


    I use 155/165/180 gr 40S&W jacketed bullets made by Montana Gold and FMJs are of similar Round Nose Flat Point bullet shape as Precision Delta 165 gr FMJ bullet. For 165 gr MG FMJ/JHP bullets, I use 5.0 gr of W231/HP-38 loaded at 1.125" OAL.

    Current Hodgdon load data:
     

    Attached Files:

    Last edited: Feb 21, 2012
Thread Status:
Not open for further replies.

Share This Page