Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help with carrier on Marlin 1893

Discussion in 'Gunsmithing and Repairs' started by finloq, Mar 17, 2013.

Thread Status:
Not open for further replies.
  1. finloq

    finloq Member

    Joined:
    May 19, 2010
    Messages:
    33
    Location:
    SoCal
  2. Old Dog Man

    Old Dog Man Member

    Joined:
    Jan 10, 2012
    Messages:
    346
    Location:
    Texas
    Marlin feed jams

    I had some problems with Marlin's several years back. It was caused by the carrier not being made correctly. This was back in 79 or 80 don't know when your's was made, but Marlin made a change to them and that fixed the problem. If your is an older one that could be your problem also. Check with Marlin customer service and they will help you. Al
     
  3. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
  4. finloq

    finloq Member

    Joined:
    May 19, 2010
    Messages:
    33
    Location:
    SoCal
    This one is from the 90's...the 1890's. The carrier is not lifting all the way.
     
  5. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Well, it's pretty much the same problem.

    The carrier, or lever, or both is worn out.

    Finding good used parts will be next to impossible.

    It can be fixed.
    By someone who knows how and can weld real good.

    rc
     
Thread Status:
Not open for further replies.

Share This Page