Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help with savage bolt

Discussion in 'Rifle Country' started by SamTuckerMTNMAN, Apr 21, 2007.

Thread Status:
Not open for further replies.
  1. SamTuckerMTNMAN

    SamTuckerMTNMAN Member

    Joined:
    Oct 4, 2006
    Messages:
    682
    Location:
    Mountains
    I pulled on my savage bolt the other day while cleaning the weapon and the firing pin mechanism went to the fired position. I cannot put the bolt back into the rifle and am having trouble putting the bolt assembly back into firing position. This is a savage 308 110. Great rifle, stupid question I know...but thats why I like the high road. Any help welcome. Have you done this and figured it out. This is how I felt when I couldnt get the gas tube back in the SKS :(

    Pics below...hope you can see them (phone pics)

    ST

    ps - that little button top pin in the first pic is what moved, and needs to move back. I suppose I'll have to dissassemble the whole thing, but even that is proving a challenge at the moment with bolt in said position.
     

    Attached Files:

  2. JesseL

    JesseL Member

    Joined:
    Aug 26, 2004
    Messages:
    2,492
    Location:
    Prescott, AZ
    I've never done it on a Savage, but generally when this happens with a bolt you just need to recock it by pushing back on the cocking piece to compress the striker spring and twist the bolt shroud clockwise against the bolt body.

    I usually compress the spring by resting the cocking piece against the edge of a solid bench and pushing down on the bolt handle.

    It's a lot easier with things like Mosins and Sprinfield that have a handle on the cocking piece.
     
  3. Chawbaccer

    Chawbaccer Member

    Joined:
    Feb 3, 2005
    Messages:
    1,865
    A little dab of grease on the cocking cam makes it easie to re-cock it.
     
  4. SamTuckerMTNMAN

    SamTuckerMTNMAN Member

    Joined:
    Oct 4, 2006
    Messages:
    682
    Location:
    Mountains
    thanks guys

    I took care of it and shot some handloads today, 168 gr BTHP's with 42-45 grains of 748. Basically I put my pocket knife (CLOSED!) on the bolt pin and pushed really hard, slightly canting to the left, and it recocked the bolt which of course slid right in at that point. So, problem solved, if anybody needs help with this drop me a note.

    ST
     
Thread Status:
Not open for further replies.

Share This Page