Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hi-Power & Feg clone question

Discussion in 'Gunsmithing and Repairs' started by Wyobuckaroo, Jan 1, 2003.

Thread Status:
Not open for further replies.
  1. Wyobuckaroo

    Wyobuckaroo Member

    Joined:
    Dec 25, 2002
    Messages:
    49
    Howdy
    Where can I get a cheap replacement bbl for a FEG Hi-Power clone to alter to shoot blanks? This will be for a reinactors group.
    Are Browning and FEG barrels interchangable? I want to keep the original bbl as is. I need details.
    Thanks
    Wyo
     
  2. che4rev

    che4rev Member

    Joined:
    Jan 1, 2003
    Messages:
    8
    yes they are interchangable. Federal Arms sells drop-in browning hi-power barrels. 1-800-486-5971
     
  3. Bill Adair

    Bill Adair Member

    Joined:
    Jan 2, 2003
    Messages:
    84
    Location:
    Seattle/Tacoma area
    Wyo,

    Better check to see what barrel is in your FEG, if you purchased it within the last year. I bought one last year that is marked the same as earlier FEGs (PJK-9HP), but has a different lockup system. :(

    The HP compatible barrel has a slot in the barrel foot, which engages a pin through the frame. You can often see the oval end of the pin, on the right side of the frame, but it's polished with the frame and hard to spot.

    My barrel has a foot that is not slotted, but has an ear (lug) on both sides, which engage slots in the frame.

    Mine also has a matt black finish.

    Bill
     
  4. Ed Brunner

    Ed Brunner Member

    Joined:
    Dec 24, 2002
    Messages:
    315
    Location:
    Natchez, MS
    I have an FEG that is about 4 years old. It is the same as the BHP. I have heard that the recent ones ARE different, so you might want to compare your barrel with a HP barrel.
     
Thread Status:
Not open for further replies.

Share This Page