Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

hk jams

Discussion in 'Handguns: Autoloaders' started by wakdt, Mar 7, 2009.

Thread Status:
Not open for further replies.
  1. wakdt

    wakdt Member

    Joined:
    Mar 7, 2009
    Messages:
    1
    i just bought an hk 40 usp, and i recently put 150 rounds of blazer brass no problems but i just bougt some blazer 180 grain aluminum and I had atleast 7 jams do u think it is the gun or the amunition.
    please give me some advise i'm really upset.
    This is a new gun and i was told that is one of the best.
    I was also told that it was probably the amunition but the guy that told me that was'nt formilar with hk so he advised me to mention it here.
     
  2. Jason_G

    Jason_G Member

    Joined:
    Jun 13, 2007
    Messages:
    1,874
    Location:
    Louisiana
    What types of jams are we talking about here? Did the fired cases fail to eject, or did the live ones fail to feed? If I had to guess, I would say your failures were ammo related, since it digested the brass cased stuff just fine. Keep trying out other ammo, see if the gun continues to run without issue, and if it does, then switch back to the Blazer aluminum to see if you get hiccups again. If so, then just don't buy anymore Blazer aluminum.

    Jason
     
  3. CPshooter

    CPshooter Member

    Joined:
    Nov 6, 2006
    Messages:
    1,420
    It's the aluminum crap you put through it. I had a Glock 19 that wouldn't eject aluminum-cased ammo reliably.

    I've read a lot of posts around here with people having the same problem using the blazer aluminum ammo.

    You did buy one of the best pistols out there. Use brass ammo and you should be fine.
     
  4. 7mmSTW

    7mmSTW Member

    Joined:
    Mar 2, 2009
    Messages:
    29
    I've never once had a problem w/ blazer aluminium in my HK's...or Glock for that matter. My guess is run the better stuff for a while and try it again. Chances are you just need to break it in. Sometimes weaker ammo doesn't go well with new guns rated to shoot hot stuff. FWIW the only ammo I ever had give me any problems in my USP was some Wolf steel, the cases split inside the chamber...never finished that box of ammo.
     
  5. badbadtz560

    badbadtz560 Member

    Joined:
    Jul 16, 2008
    Messages:
    269
    Location:
    AGS
    If they're stovepiping.. like the case is getting stuck in the slide, you might be limpwristing it and need to work on strengthening your fingers and wrists.

    If the bullet won't fit into the chamber, the ammo is probably bad

    It's an HK.. they're the best; why? b/c half the money u spend on them goes towards their marketing

    I thought my sig sucked back when I bought it, but later realized that the grips were slightly big for my hand.

    why did I think it sucked?

    b/c I bought an hk45c and it shot straight. But a few hundred rounds later, I picked up my sig and it didn't jam anymore. It's b/c my wrists are tougher from practicing the .45. It still shoots to the left a bit for me though.. indicating that I could use a smaller grip
     
  6. usmc1371

    usmc1371 Member

    Joined:
    Feb 11, 2009
    Messages:
    481
    Location:
    Portland OR
    The only jams I have ever had in my usp 40 are one or two with blazer AND I have had atleast 5 wolf casses split and stop the pistol up real nice. And that was the only box of wolf I ever put through it. After a few thousand rounds mine pretty much shoots everything. Just no wolf ever again... in anything I own.
     
Thread Status:
Not open for further replies.

Share This Page