Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HK P7 PSP Question.....

Discussion in 'Handguns: Autoloaders' started by jon_in_wv, Dec 2, 2008.

Thread Status:
Not open for further replies.
  1. jon_in_wv

    jon_in_wv Member

    Joined:
    Jul 8, 2006
    Messages:
    3,816
    I just ordered my P7 from CDNN and I have one question I can't seem to find an answer to. I've read the P7 uses some type of fluting in the chamber that uses gasses to assist in the ejection of the case. One review stated this left "unique markings" on the brass but I have not found out if the brass I shoot from my P7 is going to be OK for reloading. I'm getting a reloading setup for Christmas and I've been saving up a lot of Winchester brass but I'll be bummed it my P7 chews up the brass so I can't reload it. Do you guys have idea about this?
     
  2. mavracer

    mavracer Member

    Joined:
    Jan 9, 2007
    Messages:
    4,345
    Location:
    wichita
    not sure if it affects life expectancy of brass. but I've loaded it 3-4 times and never had problems.
     
  3. swwyo

    swwyo Member

    Joined:
    Nov 24, 2008
    Messages:
    40
    I have a P7 PSP got it a couple of weeks ago from CDNN. Want to say you will be very happy. And to answer your question the fluting in the chamber reduces surface area and allows gas to go into the chamber to help float the brass out and eject it. I have heard the only purpose of the extractor on the P7 is to extract unspent rounds and that the pistol will work flawless without it, never tested it though. After examining my brass I found other than having lines on it and being dirty looking, it is in perfect shape and can be reloaded just fine.
     
  4. CCR

    CCR Member

    Joined:
    Apr 16, 2004
    Messages:
    103
    Location:
    Mountains of East TN
    I have not seen any problem witth reloading the brass from a PSP
     
  5. jon_in_wv

    jon_in_wv Member

    Joined:
    Jul 8, 2006
    Messages:
    3,816
    Thats good news! swwyo what model did you order from CDNN? I ordered the plum colored model. It was the least expensive and is supposedly in excellent to like new condition. I can't wait to get it.
     
  6. SharonAnne

    SharonAnne Member

    Joined:
    Aug 8, 2008
    Messages:
    6
    Location:
    Senora desert
    I reloaded a PSP for years. The fluting MAY have reduced case life but not that I could measure.
     
  7. XavierBreath

    XavierBreath Member

    Joined:
    Jan 6, 2003
    Messages:
    5,054
    Location:
    Louisiana
    I have had the same experience as everyone else who has posted so far.
     
  8. Pilot

    Pilot Member

    Joined:
    Dec 29, 2002
    Messages:
    6,605
    Location:
    USA
    X Infinity.

    The black, carbon marks from the fluting clean off in my media tumbler.
     
  9. GrandmasterB

    GrandmasterB Member

    Joined:
    Dec 31, 2002
    Messages:
    727
    Location:
    Fort Worth, TX
    +1. No problem reloading brass shot through my P7. Great gun and a great shooter. Congrats!
     
  10. IMTHDUKE

    IMTHDUKE Member

    Joined:
    Aug 27, 2004
    Messages:
    1,022
    Location:
    Sweet Home Alabama
    Many things special about those P7s

    [​IMG]
     
  11. swwyo

    swwyo Member

    Joined:
    Nov 24, 2008
    Messages:
    40
    jon_in_wv, I got the mid grade best deal, listed as very good to excellent. When I got the firearm it is excellent condition. Very little holster wear and perfect internal condition. Actually the only wear I could find was some on the grip, it almost looked like a lefty had my pistol. My slide has a very slight plum color in the right light, looks really good. I am still thinking about getting a do it yourself finish job since I purchased this as a shooter and plan on pounding a lot of rounds out of it. Put the pistol to paper at 15ft had no problem keeping a group of 5 touching. If I could afford it I would probably buy another, although need to work on getting some extra mags for it now. Either way enjoy your purchase.
     
  12. jon_in_wv

    jon_in_wv Member

    Joined:
    Jul 8, 2006
    Messages:
    3,816
    Seeing what they are going for on gunbroker and auctionarms I'm really tempted to buy two, pick the best one and sell the other.
     
  13. speedy396

    speedy396 Member

    Joined:
    Jan 23, 2008
    Messages:
    6
    I also picked up a one of the mid grade PSPs last fall. It shoots well and is priced right for a shooter. I would try to see if any local dealers have some since the variance in the grades is pretty wide. I have probably put a few hundred rounds through it. After inspecting some of the brass from the PSP, I have noticed a slight expansion of of the case near the extraction "ring" marks. Wondering any other have noticed this and is this ok? Is the "ring" around the case normal, too? The ringed area of the PSP brass measures from about .392 to .393. 9mm brass from other guns only measures max about .391 in the same area.
     
  14. PX15

    PX15 Member

    Joined:
    Jan 21, 2004
    Messages:
    1,522
    Location:
    SE Georgia
    JMOfartO:

    Can't help you with the brass issue, but I can congratulate you on buying what I've come to believe is one of the best 9mm pistols ever made.

    I know I've had a pile of 9mm pistols over the past 45 or so years of firearms ownership and while some of them were very accurate (the Walther P99c/AS comes to mind), NONE have the inherent accuracy of the HK P7, imo.

    I bought an "A" grade CDNN HK P7 and it came NIB.. :) After shooting it I was so pleased I actually sold some other pistols I wasn't using to buy TWO more "A" grade HK P7's from CDNN. The last two came "as new", but had been fired.. I think. I also picked up 6 extra mags from CDNN while the "gettin' was good", as it seems the supply has dwindled quite a bit.

    One of my P7's had more of the "plum" tint on the slide, but surprisingly, I like it.. Just makes it sorta unique.

    I think you'll be well pleased with your new Lower Saxony Police HK P7.

    I love mine.

    Best Wishes,

    Jesse

    [​IMG]
     
  15. jon_in_wv

    jon_in_wv Member

    Joined:
    Jul 8, 2006
    Messages:
    3,816
    I ordered the plum slide model from CDNN because it was listed as like new when the 589 models were good to excellent. I also was a pic on another board of the plum slide model and I really like the look of it. It should be here mid week next week. I can't wait to get it to the range.
     
  16. jon_in_wv

    jon_in_wv Member

    Joined:
    Jul 8, 2006
    Messages:
    3,816
    I picked up my P7 from the dealer today. IT AWESOME!!!! It is brand spankin new. There is evidence it was test fired but it is flawless throughout with not a scratch on it. I'm taking it to the range tomorrow. I only have one mag but that will do for now. After my range session tomorrow I'll post a review and some detailed pics with comparisons to my trusty M&P 9C. If this thing shoots as good as it looks I think I'll be very, very happy with it.
     
  17. zx12rider

    zx12rider Member

    Joined:
    Sep 22, 2008
    Messages:
    227
    Location:
    Central CT
    Price

    What is CDNN's price for the different models? I am bidding on one now and want to know if I am going too high.
     
  18. IMTHDUKE

    IMTHDUKE Member

    Joined:
    Aug 27, 2004
    Messages:
    1,022
    Location:
    Sweet Home Alabama
    You wont be disappointed.
     
  19. jon_in_wv

    jon_in_wv Member

    Joined:
    Jul 8, 2006
    Messages:
    3,816
    I paid 599 and it was listed with the plum slide in excellent to like new condition. It came definitely like new. I'm very happy so far.
     
  20. new_steyr1

    new_steyr1 Member

    Joined:
    Dec 6, 2008
    Messages:
    47
    I saw this gun in the store for $2,000. Do you mind telling us how much you paid for it from CDNN?
     
  21. jon_in_wv

    jon_in_wv Member

    Joined:
    Jul 8, 2006
    Messages:
    3,816
    Check post #19. Also the one you saw in the store was most likely a P7M10 pr P7M13 which are the only ones that would draw a price even close to that. I looked on Auction Arms today and found a P7M8 for 1400 that came with three holsters and 6 magazines. Thats about 300 bucks worth of mags. It was a great deal. The P7M8s are usually over $1000. The P7 PSPs are approaching that price some places but you can still order them from distributors like CDNN for under 600 bucks.
     
    Last edited: Dec 12, 2008
Thread Status:
Not open for further replies.

Share This Page