Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hornady powder measure on a Lee

Discussion in 'Handloading and Reloading' started by broham, May 9, 2009.

Thread Status:
Not open for further replies.
  1. broham

    broham Member

    Joined:
    Sep 14, 2007
    Messages:
    208
    I am thinking of putting a Hornady powder measure on my Lee 4 hole press. I manualy index the press now so the extra weight of the Horn measure shouldn't be an issue. As far as the linkage goes I see they sell the case activated linckage and also a lower piece( quick change set up) When you buy the linckage is it ready to go or do you need other parts to? Has anyone had any experience with a set like this? Any thoughts or sugestions would greatly be appreciated.
     
  2. lnlreloader

    lnlreloader Member

    Joined:
    May 9, 2009
    Messages:
    46
    I put a case activated Hornady powder measure on a Lee press, and it worked fine. I think all I had to add to the powder measure was the case activated kit. Everything you need should be in the kit, or included with the powder measure.
     
Thread Status:
Not open for further replies.

Share This Page