Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HOT S&W NEWS-

Discussion in 'Handguns: Revolvers' started by Ala Dan, Dec 2, 2004.

Thread Status:
Not open for further replies.
  1. Ala Dan

    Ala Dan Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    12,879
    Location:
    Home Of The First Capitol Of The Confederate State
    Greeting's All-

    A S&W factory rep was in house today with a brand new salesmans demo
    package that included one that might just be a hit with revolver geeks.

    They will re-introduce a mdoel 21 at the 2005 S&W shot show. The gun
    I inspected was a six-shot, 4" barrel, fluted cylinder, blue steel .44 SPL;
    built on Smiths N-round butt frame. It had the old style blade type front
    sight, with a square notch rear; combat trigger and hammer. And had
    the words "Thunder Ranch" inscribed on the side plate. It is too come
    in a wooden (?) presentation type box; with a MSRP of $958.

    Best Wishes,
    Ala Dan, N.R.A. Life Member
     
  2. Jim K

    Jim K Member

    Joined:
    Dec 31, 2002
    Messages:
    17,566
    I saw a discussion where a lot of people were criticizing that revolver, claiming that it was too garish and that the logo was too glaring and oversize, for which they blamed S&W. Of course, S&W only put on what the Thunder Ranch people wanted.

    The gun might be a good buy if one likes the caliber and all, but it is worth noting that special order guns that cost big bucks over the price of the standard model very seldom hold their value and can usually be bought a year or so later for the same or less than the equivalent standard model. Of course, in this case there really is no current standard model (the 696 is closest) so the gun might sell on the basis of nostalgia to people who couldn't care less about the logo. This also might be a feeler to see just what interest there might be in reviving the Model 21.

    Jim
     
  3. Gordon

    Gordon Member

    Joined:
    Dec 26, 2002
    Messages:
    8,106
    Location:
    central Kali.
    wonder where this should put the price of my real honest to G-d Model 21, you know the one with forged steel parts (no MIM) fitted by skilled workers who took pride in their work? :rolleyes:
     
  4. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    21,957
    Considering that they only made 1200 of the Real M-21 because nobody cared when it was in the catalog, pretty high. Funny how that works, isn't it? A flop then a rarity now.
     
  5. klw

    klw Member

    Joined:
    Feb 15, 2003
    Messages:
    97
    Old News

    What am I missing here. This has been discussed to death on the Smith sites for months. 3000 to be made, I think. Probably all with be sold before any serious number are delivered. Deliveries have just started.
     
  6. Majic

    Majic Member

    Joined:
    May 3, 2003
    Messages:
    5,370
    Location:
    Virginia
    That hot news has been beat to death for several months now. Clint Smith joined the discussion on the S&W forum after magazine article came out of him disliking people talking bad about the revolver. It was a rather lively thread running.
     
  7. denfoote

    denfoote Member

    Joined:
    Dec 25, 2002
    Messages:
    4,622
    Location:
    Near the border of occupied Azlan and Mexico.
    It's a nice gun!!

    Except for that garrish Chuck Smith Logo!!
     
  8. FPrice

    FPrice Member

    Joined:
    Dec 22, 2002
    Messages:
    3,380
    Location:
    People's Commonwealth of Massachusetts
    denfoote...

    "Except for that garrish Chuck Smith Logo!!"

    Chuck Smith???
     
  9. Litlman

    Litlman Member

    Joined:
    Dec 27, 2002
    Messages:
    779
    Location:
    N.E Pa
    There is a very large "locked" thread over on th S&W Forum on this subject. Clint Smith himself and a couple other big names had many responses to forum members complaints and veiws on the weapon and Clint's words he used to describe people who didn't dig or get the concept or very ulgly out of place gold T.R. logo on the side plate. Most desribed it as a "bill board". I think Clint called somebody a "turd sucker" alot of people took it personal and went off on him, S&W and the mag. that he writes for. I don't like the looks of the logo, price or caliber. The weapon has a nice look to it but I woold like it in 357 and about $350 cheaper! Go oover and read the thread. Be good...
     
  10. 9146gt

    9146gt Member

    Joined:
    Jan 4, 2004
    Messages:
    6
    Location:
    indy
    2005 Shot show

    952 6" barrel will be introduced at the Shot Show.

    Tom
     
  11. SnWnMe

    SnWnMe Member

    Joined:
    Jul 13, 2003
    Messages:
    1,099
    Location:
    Inland Empire
    Looks notwithstanding, it's a start. Hopefully the TR21 will be the first of many soon to come resurrections of the old N frame guns. I am sure that Smith will get at least one of them "right". I would like new Model 22s, 24s, 26s (well, the Mtn Guns are kinda like 26s) and of course, the 27s and 28s.

    Thanks to Clint Smith for getting S&W to make this gun.
     
  12. carpettbaggerr

    carpettbaggerr Member

    Joined:
    Nov 13, 2003
    Messages:
    1,676
    There's a big thread somewere here about it too. Search for "turd sucker" -- don't imagine the term shows up in that many posts. More common search terms would include: billboard, garish, and overpriced.

    They look good to me, except for the oversized logo and the keyhole.
     
  13. HankB

    HankB Member

    Joined:
    Mar 29, 2003
    Messages:
    5,211
    Location:
    Central Texas
    You mean pinned & recessed, with the firing pin mounted on the hammer, no MIM parts, and no internal lock?

    Don't hold your breath.
     
  14. Jason Demond

    Jason Demond Member

    Joined:
    Dec 24, 2002
    Messages:
    960
    Location:
    Mivonks, MI
    If S&W would make them again, I bet they would sell every one of them. Probably before they even left the factory!

    I wish S&W would reissue a blued 3" square butt P&R model 27, or a blued 5" square butt P&R model 29.

    Some of todays guns are really super, but they are not classy like guns of old. :(
     
  15. denfoote

    denfoote Member

    Joined:
    Dec 25, 2002
    Messages:
    4,622
    Location:
    Near the border of occupied Azlan and Mexico.
    Yeah, whatever his name is!!

    How about: "Except for that garrish Heidi Smith logo"!!!

    She's more cute anyway!!! :evil:
     
  16. BlkHawk73

    BlkHawk73 Member

    Joined:
    Mar 27, 2003
    Messages:
    2,365
    Location:
    Maine
    I'm not even a S&W person and know that this "HOT S&W NEWS-" is old news. More or less, this is a contract edition between Clint and S&W. Been done before with other manufacturers. If they brought back a plain-jane M21, it would likely do quite well. Maybe this'll pave the way.
     
  17. SnWnMe

    SnWnMe Member

    Joined:
    Jul 13, 2003
    Messages:
    1,099
    Location:
    Inland Empire
    I think that's asking for too much at this point. Although we can probably get cardboard boxes back. I just want plain jane, blued shooting wheelies at better prices. Maybe pay a bit more for a 27 if it has the real checkering.
     
  18. mec

    mec Member

    Joined:
    Dec 27, 2002
    Messages:
    4,458
    One guy morphed it into The "T**ds***er Special "Internet Whiner's" Model.
     
    Last edited: Aug 29, 2010
Thread Status:
Not open for further replies.

Share This Page