How do you store your brass?

Status
Not open for further replies.
Old coffee cans, just because it's what I had available at the time. Still working good after 30 years
 
I accumulated several frankford arsenal 100rd ammo boxes for under $2 a piece so a lot of brass that i will use soon is in those. I only use LC for 223rem and separate by year and which 223rem rifle they will be used for so if i have 200pc of LC09 i label the plastic box LC09 Heavy barrel only because its trimmed, sized, shoulder set back for that rifle. I have some mixed year LC brass that's only like 5-10pc of each year and that's in a separate box for the other rifle. Right now i have 4-5 of these boxes with empty brass in them that's for a specific rifle, load, etc. I also put bulk stuff that's not sized, trimmer, etc in zip lock freezer bags cause they are the most durable or old plastic coffee cans.

Hunting guns only have 100pc of brass which they stay in a 100rd frankford ammo box, 9mm sits in either zip lock bags or plastic rubbermade bins.
 
I keep brass in totes like Nature Boy. Only about half as many because most of my brass is loaded ready to go.
 
BrianC636 wrote:
How do you store your brass?

I was in the middle of processing a large quantity of brass about 25 years ago when I was afflicted with a neurological condition that almost killed me. In time, an experimental treatment allowed me to make a nearly-full recovery, but it left me with the unique experience of being able to see how brass stored in a number of configurations fared over two decades of neglect.

The worst results came from simply leaving it in Ziploc bags in a drawer in a cabinet in a garage in Texas (up to 15% of the cases were corroded to the point I did not feel they were safe to use). The best results came from storing the brass in plastic boxes where each case had an individual compartment and then storing the plastic boxes in a sealed container (losses under 1%).

Based on this, I now store all of my brass in plastic containers with individual compartments for each case which are then stored in sealed containers or are stored in a dry underground bunker.
 
Walkalong wrote:
Do they still have steel cans?

Yes. Several brands still sell their product in steel cans.

Roasted coffee continues to be chemically active after packaging and continues to release gasses (vapor). Steel cans were the standard for many years because they simply contained these gasses. If you look at foil packaging like at Starbucks, you will see a little one-way valve in the package which releases these gasses. The lids used on plastic coffee cans are designed to allow these vapors to escape. Thus, if plastic cans are to be used for long-term storage, it is advisable to apply a bead of caulk to the lid prior to sealing the can.
 
muleman11 wrote:
Empty milk jugs, lay them on their side and they stack

This is a good idea as the polyethylene is very stable and generally compatible with brass. Make sure to wash milk containers thoroughly and repeatedly with hot water as the lactose present in milk becomes acidic when it decomposes so you want it removed from the jug before storing metals in it.
 
but I like the plastic Folgers cans.
lol, I guess I am old school, to me a "can" is steel. :)

I actually have a couple of Folgers coffee "cans" in the shed I picked up from somewhere, neither the wife or I drink coffee. And yes, they have brass in them. .380.

The .30-06 brass is in two old snack containers. pretzels or something, don't remember for sure.

The 9MM, .40, and .45 I find a lot of is in 2 1/2 and 5 gallon plastic containers with snap on lids.

I still feed the dogs with a very old 1 pound metal coffee can.
 
Last edited:
These 18.25 oz cans of cashews cost 11 bucks at wallyworld, but you get a free brass container with each one! I separate my brass by headstamp so a bunch of smaller cans works best for me. One of these holds ~400 9mm cases or ~250 38 special.

I also fill them with bulk bullets. I wouldn't want much larger cans for that as a full one of these is heavy enough.

nuts.jpeg
 
Use the same Walmart clear containers with green handles as in Nature Boy's pic. Funny how many of us use these. But they stack, you can see in them, and, in my case, I label both ends with what is in them using a sharpie....the sharpie will wash right off with 90% alcohol or mineral spirits when you repurpose.
 
I use these plastic totes for most of my brass.

View attachment 774238

I use sticky notes to keep track of what’s what and how many times they’ve been fired

The green handle ones are the ones I currently use. I have 3 of the largest ones they make for .223, 9mm and .45 that are full with an additional 5 gallons of 9mm needing to be cleaned and processed. I may get some 15 gallon barrels (guy sells metals ones locally on CL for 10 bucks with a lid that seals) for my high count stuff and use what I have to store the rest.
 
I use the Rubbermaid Rough Neck bins from Home Depot. Can stack a couple of large tupper ware bins and some gallon bags in them. Then I have a metal bakers rack that I got at Target, set the shelves so I can stack two tubs on each other if need be. Works pretty well for keeping everything organized.
View attachment 774208 View attachment 774209

I use the 3 gallon Roughneck. I prefer smaller, they get too heavy otherwise.
 
The bins I use are Sterilite brand 7qt,. ()couldn't remember in my earlier post)They come in various sizes like all the plastic bins.
I like these because the blue handles lock down the lid so the lid is not likely to come off if you grab the bin one handed by the handle.
Can't rember what the first one I bought were but these are nicer.
I have had some sitting in my shed for 2 summers at over 100 degrees and they seem to be holding up ok.
(Powder gets to come inside in the summer time:))


DSCF0002.JPG
Untitled.jpg
I do have some in primed 9mm cases in plastic candy jars. Sams Club brand caramels.
I had to buy and eat three whole jars of candy just so I had more of the empty jars.
It was terrible what I had to go through to get those jars, I would eat a piece of candy then go back and eat another one then go back.....
Nice screw on lid.
They are quite good caramels by the way....)


I get coffee from Trader Joes and use the empty containers for temp storage but they have cardboard walls, wish it came in the good old style metal cans, but not changing brands of coffee.
 
Last edited:
Up until recently, I used half gallon sized plastic totes. The empties were quickly reloaded and put in with the proper containers for loaded ammunition. Since I got a progressive loader, I've begun to use larger containers - steel coffee cans to load larger batches at a time.
 

For bulk brass; handgun and .223, I use similar, combination of Kitty Litter containers and frosting containers from Walmart:

PxmAsawh.jpg

To rotate, I have 2 containers per caliber, load from one, and dump cleaned empties in the other. Once the loading bin is empty, switch.

For the majority of my rifle I use either 50 or 100 rd plastic boxes to keep the brass together as a "lot".

Chuck
 
Empty coffee cans, they are plastic but can stack easily enough

Empty 2 and 5lb protein powder jugs work well

Walmart totes

20mm ammo cans work

I use a lot of different containers and they all work, but I don’t have the amount on hand that some do
 
Status
Not open for further replies.
Back
Top