Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

how much space is needed for handloading/reloading equipment

Discussion in 'Handloading and Reloading' started by spuscg, Sep 12, 2008.

Thread Status:
Not open for further replies.
  1. spuscg

    spuscg member

    Joined:
    Sep 8, 2008
    Messages:
    197
    was wondering if standard workbench or large desk could fit it all? or if i have to wait a while before even thinking of getting equipment when i have more room
     
  2. The Bushmaster

    The Bushmaster Member

    Joined:
    Jan 29, 2005
    Messages:
    7,836
    Location:
    Ava, Missouri
    Anything from a shoe box to a reloading/gun room. Depends on how deep you wish to venture into this hab...hobby...

    If the "standard" work bench or "desk" are heavy enough or bolted to the wall studs, yes they will do...When resizing/decapping a rifle case it may sometimes require a bit of force that can tip the bench over on you...So make sure it is well anchored...
     
  3. herohog

    herohog Member

    Joined:
    Dec 21, 2007
    Messages:
    727
    Location:
    Shreveport, VA
    Here is my setup. Simple, even with 3 presses and a tumbler.

    [​IMG]

    Ignore the drums etc...
     
  4. lgbloader

    lgbloader Member

    Joined:
    Apr 17, 2008
    Messages:
    1,548
    Location:
    LGB
    It depends on how much you shoot, how much you handload, and how long you've been doing it.

    I have a great ammo factory in my Cave in the garage. However, it has always tended to creep into the house and about 2 weeks ago, I made a mini bench that is right next to my recliner in the living room. I know, my wife rules!!!!

    So back to the question, as the bushmaster stated: as small as a shoe box or as big as your home. It's really up to you..


    Herohog: are those "marackas" on your bench?
     
  5. herohog

    herohog Member

    Joined:
    Dec 21, 2007
    Messages:
    727
    Location:
    Shreveport, VA
    Yes, made with coconuts! There is an Cabassa behind the hopper next to them. I used to be a drummer/percussionist until my back got to bad to keep doing it. I kept a small "jungle kit" for when I just HAVE to play for just a few minutes!

    The bench is a kitchen table that came with the house. It was heavy enough to be just right as a loading bench! I just picked up an old Lyman press that I need to set up on there along with the Lees now.
     
  6. Griz44

    Griz44 Member

    Joined:
    May 4, 2008
    Messages:
    613
    Location:
    REPUBLIC OF TEXAS, DISTRICT OF ROUND ROCK
    Required space is as little or as much as the space you have available. Folks her use as little as a chair (with them sitting in it) to an entire large room with dozens of presses.
     
  7. dmftoy1

    dmftoy1 Member

    Joined:
    Nov 17, 2003
    Messages:
    2,213
    Location:
    Lexington, IL
    I loaded for 4 years on a bench that fit into a smallish closet when I was in college. The entire thing was maybe 2 1/2 feet wide by 2 feet deep. It worked fine and I just had to be very organized. My current bench is 7 feet long and close to 3 feet deep . .thought it was overkill.. .now I wish it was 9 feet long. :)

    Have a good one,
    Dave
     
  8. AStone

    AStone Member

    Joined:
    Aug 5, 2005
    Messages:
    24,176
    Location:
    Far N, E coast
    No way.

    This bro's got a drum set in his reloading shop.
    (Or is that a reloading shop in his drum studio?)

    How cool is that? :cool:

    Nem (plays a Roland Handsonic
    even if I don't reload yet)
     
  9. herohog

    herohog Member

    Joined:
    Dec 21, 2007
    Messages:
    727
    Location:
    Shreveport, VA
  10. Seafarer12

    Seafarer12 Member

    Joined:
    Jan 31, 2008
    Messages:
    1,028
    Location:
    Austin, TX
    My apt. reloading kit takes up a small box minus my scales. The boxes I have for my powder and primers take up more room. But I am also using a hand press at the moment. All of my other presses are in storage. A small sturdy desk would have plent of room for a small reloading set up.

    [​IMG]
     
  11. scrat

    scrat Member

    Joined:
    Jan 27, 2007
    Messages:
    6,882
    Location:
    Monrovia, CA
    That is so cool
     
  12. Seafarer12

    Seafarer12 Member

    Joined:
    Jan 31, 2008
    Messages:
    1,028
    Location:
    Austin, TX
    It works, I reload 38/357, 7mm-08, 45/70, and hopefully in the next month or so 7-30 Waters. I will admit the hand press sucks for sizing the larger cases but it gets the job done.
     
  13. Eric F

    Eric F Member

    Joined:
    Jul 23, 2007
    Messages:
    2,934
    My first press was a lee turret for 45-70, worked great, I had some washers bolts and c clamps. I simply clamped it to a bence or desk and loaded every where including right there at the range.
     
  14. Rokman

    Rokman Member

    Joined:
    Apr 29, 2006
    Messages:
    1,046
    Location:
    The Lone Star State
    I have a 5'x2.5' bench that I built for my garage. I built it initially just for cleaning and working on my firearms, etc. Thank goodness that I built it sturdy because it works great for my modest reloading talents. You will find that you are eventually going to need more space for all the supplies and gadgets that you are going to want.
     
  15. spuscg

    spuscg member

    Joined:
    Sep 8, 2008
    Messages:
    197
    im just gonna be working on 12 guage now but in the future ill be buying a .308 or other high powered rifle.
     
  16. herohog

    herohog Member

    Joined:
    Dec 21, 2007
    Messages:
    727
    Location:
    Shreveport, VA
    Here is what my buddy did ALL his reloading on. He attached his press to this and used a TV tray to hold the rest!

    [​IMG]
     
  17. cliffy

    cliffy member

    Joined:
    Aug 11, 2008
    Messages:
    643
    Location:
    Southwestern Michigan
    10' x 20' appears perfect

    I have a large house, but only one small room is dedicated to reloading. I plan to move into a smaller house soon, so even if my new 10' x 11' bedroom doubles as my reloading room, so be it. An 8' x 2' reloading bench is about the perfect size, so it should fit into any room with a DVD and TV. Reloading demands an entertainment system. One could swiftly go bonkers in a silent room. cliffy
     
  18. res45

    res45 Member

    Joined:
    Sep 23, 2007
    Messages:
    550
    Location:
    North Carolina
  19. jr_roosa

    jr_roosa Member

    Joined:
    Oct 28, 2007
    Messages:
    980
    Location:
    Denver, CO
    You can go pretty small if you need to. I'm set up on a small bench on one side of my workshop.

    I tend to spread out and work on different benches for different stuff (trim cases over there, run the tumbler over there, sort brass in front of the TV in the living room), but I could function with about 18" wide by 12" deep bench space to mount the press and the powder measure with enough room for the reloading block in between. Powder scale goes on the wall on a little shelf at eye level. My powder and primers sit in a styrofoam cooler on the floor in the corner (the shop isn't air conditioned), and die boxes and whatnot go on a small shelf or in a tackle box at the back of the bench.

    When I move next month, I'm getting a smaller workshop which is my trade-off for a bigger house so I'll probably mount the press and powder measure on a 2x6 that can be clamped to a workbench and put away when not in use to free up the bench.

    Basically, your reloading gear will swell to fill whatever space you let it take up. If you have no space, you can do the job with a hand press and some counter space for a powder measure and scale. If you have a barn, you can probably fill it with reloading crap if you put your mind to it.

    -J.
     
  20. Soybomb

    Soybomb Member

    Joined:
    Oct 31, 2005
    Messages:
    3,959
    I've put all my hardware except for the scale into a .50 ammo can and reload sitting at my desk or in my recliner. The rest of the space is as much component as you feel like stocking. It won't be the fastest setup but if you're not a high volume shooter its not bad either. When I'm done everything gets packed up in the ammo can and just stacks with ammo.
     
  21. Jayman

    Jayman Member

    Joined:
    Jul 24, 2003
    Messages:
    300
    Location:
    Chantilly, VA
    I've got my press bolted to a small rolling TV cart. I put it where I want it and then weigh it down with a couple of boxes of bullets. That keeps it from moving around. When I'm done, I put the whole contraption in a corner and it isn't readily visible in the room at all. It is a Dillon 650 with casefeed. I have my manuals and other supplies on shelves right beside it. I have A LOT of reloading gear and it cleans up very neatly and relatively quickly.
     
  22. evan price

    evan price Member

    Joined:
    Dec 7, 2005
    Messages:
    5,476
    Location:
    http://www.ohioccw.org/ Ohio's best CCW resour
    I have a PRo-1000 and Lee cast turret press mounted on a base like shown in Herohog's picture, from Midway.

    I size .308 no problem. I can move it anywhere in the house I want, or in the yard if the weather is nice.

    I keep the spare parts in a Rubbermaid tote tub that goes on a shelf in the utility room closet.
    Cases get sorted into plastic jugs either in the utility room or out in the den if I am loading. Powder & primers are stored in small quantities on the shelf in the den in the game closet, large kegs go in the utility room pantry on the bottom shelf.

    Bulk lots of bullets get stored in shallow plastic bins that slide under the sofa.

    In a pinch (Like, a contractor or someone coming over) the presses come off of the base, the base breaks down under the sofa, and the presses go in another tub in the utility room.

    "Stealth" reloading.
     
Thread Status:
Not open for further replies.

Share This Page