Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to build-up the stock

Discussion in 'Rifle Country' started by WayneConrad, Mar 27, 2008.

Thread Status:
Not open for further replies.
  1. WayneConrad

    WayneConrad Member

    Joined:
    Feb 21, 2005
    Messages:
    2,128
    Location:
    Phoenix, AZ
    I've got a scoped .22 that I can't get a decent cheek-weld on. It takes a chin-weld to see through the center of the scope. I bought some foam weatherstripping tape from the hardware store. Works, sorta, but it's too squishy.

    How can I build up the stock so that I can get a decent cheek weld? Cheap is good. Tape or adhesives are fine. Modifying the stock is not. It doesn't have to look pretty.
     
  2. GunDoctor

    GunDoctor Member

    Joined:
    Mar 20, 2008
    Messages:
    242
    Location:
    Utah
    Be glad to help out but first what kind of stock do you have? Wood or synthetic?
     
  3. mc223

    mc223 Member

    Joined:
    Jun 18, 2006
    Messages:
    860
    Location:
    Just Down the Road
  4. WayneConrad

    WayneConrad Member

    Joined:
    Feb 21, 2005
    Messages:
    2,128
    Location:
    Phoenix, AZ
    Wood stock. I don't think I can go any lower on the rings, as it's a center-fire scope with a fairly big objective.
     
  5. ceetee

    ceetee Member

    Joined:
    Sep 7, 2003
    Messages:
    1,998
    Bass Pro Shops sells these kits for around $20. One of these worked great for me when I put a scope on a high mount on my CETME.

    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page