Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to clean firing pin channel?

Discussion in 'Handguns: Autoloaders' started by bg226, May 26, 2010.

Thread Status:
Not open for further replies.
  1. bg226

    bg226 Member

    Joined:
    Apr 27, 2006
    Messages:
    503
    I don't know how to disassemble the firing pin channel on an old BHP. Can I just spray some degreaser inside of it?
     
  2. collector rob

    collector rob Member

    Joined:
    Apr 12, 2006
    Messages:
    54
    Location:
    Lynden WA
  3. jonnyc

    jonnyc Member

    Joined:
    Dec 5, 2004
    Messages:
    2,377
    Location:
    SE Pennsylvania
    1. Depress end of FP and slide plate out. Be careful not to let everything fly out. Clean with a q-tip and solvent.
    2. Spray a solvent in, work the FP back and forth gently, spray dry with compressed air.
    Either way works well.
     
Thread Status:
Not open for further replies.

Share This Page