Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How's this for a hunting load

Discussion in 'Handloading and Reloading' started by whitetail2, Nov 10, 2010.

Thread Status:
Not open for further replies.
  1. whitetail2

    whitetail2 Member

    Joined:
    Jan 4, 2010
    Messages:
    13
    Location:
    Indiana
    Puma '92 in 45LC. New Starline brass, Win large pistol primers, 300 grain Hornady XTP (.452), 17.6 grains of Alliant 2400. COL 1.6535.
    Plan on using this on Whitetail and Russian Wild Boar.
    Think it will get the job done?
     
  2. rogn

    rogn Member

    Joined:
    Sep 9, 2006
    Messages:
    287
    huntin load

    That should be a good thumper. Big hole in, bigger hole out. Another load with more thump is the 300 gr XTP with a LPM primer, WW cases and around 23 gr of H110( this shows up in print in more than 1 location, Hodgdon manual is 22.2 for handgun w/ 30ooo psi) Shoots safley in our 2 Pumas and chronos >1700fps, with excellent accuracy. The Puma was made and still is in 454 Casul-rated at 60ooo psi. If you try this load drop to 22 gr and work upward, using good judgement. Either way the whitetails and boars are in a heap of trouble.:D GOOD HUNTING!
     
  3. susquehannaslim

    susquehannaslim Member

    Joined:
    Jan 1, 2010
    Messages:
    29
    rogn, isnt H110,very similar to Win 296,and you should NEVER reduce powder charge ? just asking.
     
  4. kludge

    kludge Member

    Joined:
    Jun 15, 2006
    Messages:
    2,634
    Location:
    Indiana
    The deer I shot last year was a 300gr .452" XTP/Mag at 1620fps MV from a 9.5" SRH .454 Casull. I don't remember the charge off hand, but it was the Hornady start load with 2400.

    .45" hole in one side, nickel sized hole on the other. Destroyed the right lung and turned the liver inside out. Range was ~40 yards.

    The .454 is overkill for whitetail, but my range an easy 125yds before gravity gets ahold of it.

    The 300gr XTP will do just fine.

    I can't comment on its safety/pressure, since I don't have any heavy .45 Colt +P load data in front of me.
     
  5. Hondo 60

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,260
    Location:
    Manitowoc, WI
    Your OAL seems very long & Hornady's manual doesn't list a 300 gr bullet for a rifle load.
    Are you seating to the cannelure?
    They do list the 300 gr for Ruger & T/C only. (revolvers)

    Is that for an HP-XTP or for the XTP-Mag?
    The Ruger-T/C 300 gr XTP-Mag OAL is 1.655.
    The Ruger-T/C 300 gr XTP-HP OAL is only 1.580.

    The powder listing for 2400 is 16.5 - 18 gr

    Please stay safe!
     
  6. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    I agree a COL of 1.6535" seems too long.

    SAAMI max length for the .45 Colt is 1.600", and a lever-action very likely will not feed something longer then that.

    I believe that is why they don't list the 300 XTP-MAG bullet in the rifle section.

    The standard 300 XTP would work at 1.580", but they don't list it either?

    rc
     
  7. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    14,289
    Location:
    West Tennessee
    Is it the XTP or the Speer 300gr that has dual cannelures???
     
  8. kludge

    kludge Member

    Joined:
    Jun 15, 2006
    Messages:
    2,634
    Location:
    Indiana
    300gr XTP/Mag has two cannelures. IIRC
     
  9. rogn

    rogn Member

    Joined:
    Sep 9, 2006
    Messages:
    287
    SS, its claimed that 296 & H110 are the same? I dont know. The data from lowend is from Hodgdon data mamnual- Start @ 21.8gr. but they level off at 22.2gr max. There is ample data for the 45LC and 300gr going well up from there. My comfort level is 23.0gr.
     
  10. whitetail2

    whitetail2 Member

    Joined:
    Jan 4, 2010
    Messages:
    13
    Location:
    Indiana
    The XTP -Mag has only 1 Cannelure, according to the Hornady manual I have in front of me. The replys above made me go back and recheck everything and boy am I glad I did. Hornady Manual 7th edition has the wrong Picture shown for the XTP and the XTP-Mag. They have them switched. I am going back and reducing the COL to make them right.
    I'm very glad I posted this as you guys found a problem with my setup I somehow missed. Thank you.
     
    Last edited: Nov 11, 2010
  11. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    14,289
    Location:
    West Tennessee
    If you have a single cannelure, forget the COAL, just seat it to the groove and crimp. It should feed them fine. Do they not feed correctly?

    You can run up to 19.0gr 2400 and still be within "Ruger only" levels. Although the 1892 is significantly stronger.
     
  12. whitetail2

    whitetail2 Member

    Joined:
    Jan 4, 2010
    Messages:
    13
    Location:
    Indiana
    With the bullets crimped in the cannelure, they feed just perfectly. I've already shot about 100 rounds of this setup and haven't had any issues.
     
Thread Status:
Not open for further replies.

Share This Page