Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ID help on powder and shot dispenser

Discussion in 'Handloading and Reloading' started by David E, Jun 20, 2013.

Thread Status:
Not open for further replies.
  1. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    Found this going thru some stuff. One must be powder, the other for shot, I presume. Wrinkled texture paint on the base is black. Both are permanently attached to base. Both have baffles in them. I have two if these. One has both lids, the other does not.

    Wondering about brand, make, or model. And can anybody use these?

    aqagema5.jpg
     
    Last edited: Jun 20, 2013
  2. Uniquedot

    Uniquedot Member

    Joined:
    Jun 9, 2010
    Messages:
    924
    Location:
    Alabama
    Could be repainted herter's or C&H or perhaps hollywood. What are you asking for each?
     
  3. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    Highly doubt they are repainted, unless one of those companies painted it a different color to sell under another brand name or some such.

    I don't know what their value is.
     
  4. jaguarxk120

    jaguarxk120 Member

    Joined:
    Dec 30, 2011
    Messages:
    852
    Go thru ebay searching for powder measures. Do a (-lee) switch to cut down on listings you don't need.

    Usually someone has a listing and pictures of the older duo style measures.
     
  5. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    I think Hollywood Engineering was crinkle black.

    rc
     
  6. Joatmon

    Joatmon Member

    Joined:
    Oct 30, 2010
    Messages:
    119
    Location:
    Michigan
    Hollywood items are the black crinkle paint but they are generally marked somewhere on the casting, so I am not sure about that lineage. Most of the Herters line were painted a dark brown crinkle paint although I have at least one example of a black painted press. Many items of Herters lines have few marks of ID. Cant see any pics in your post so just guessing.
     
  7. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    Sorry, forgot the pic! I just added it to the OP

    Also, I'm presuming the second tube is for shot. One is discolored from powder, the other is not.
     
  8. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    If someone can use these, $20 will cover shipping.

    Otherwise, they're going in the trash.
     
  9. Joatmon

    Joatmon Member

    Joined:
    Oct 30, 2010
    Messages:
    119
    Location:
    Michigan
    That is the top of of a Ponsness Warren shotshell loader. Cant tell which one but most likely a 375 or a 600B. Given the height of the tubes I would guess a 600B (progressive). I am sure that someone out there could use this, I would take it myself for a backup on my 600 or 375 but I just dont use them that much (and I have too much stuff now). I am sure it would sell online if you want to go that route. Dont throw it away.
     
Thread Status:
Not open for further replies.

Share This Page