Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I'm Looking For

Discussion in 'Rifle Country' started by CB900F, May 26, 2008.

Thread Status:
Not open for further replies.
  1. CB900F

    CB900F Member

    Joined:
    Feb 22, 2003
    Messages:
    4,717
    Fella's;

    I'm looking for bottom metal for a standard length action Tikka T3. In the white or blued, no difference to me, I'll take either. I'm building a gun based on the T3, but would really like to replace the nylon with metal & blue it to match the barrel & action.

    I've checked Brownell's & didn't see anything. My options seem to be either modifying the magazine set-up & going with something like Winchester model 70 bottom metal, or staying with the stock nylon. Unless somebody here knows of another way to do it?

    900F
     
  2. 220_Swift

    220_Swift Member

    Joined:
    Jan 15, 2006
    Messages:
    416
    I would find a local machine shop. They should be able to reproduce anything you give them in metel. We have a shop near here run by the Amish. I have taken in numerous plastic parts to be made into metel, or make a new one from something broken. They have never once failed, and a couple times made the item much better in design. Just a thought, but that is what I would do. Good luck, and good shooting.
     
Thread Status:
Not open for further replies.

Share This Page