Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Imr 4198

Discussion in 'Handloading and Reloading' started by Sniper66, Sep 29, 2012.

Thread Status:
Not open for further replies.
  1. Sniper66

    Sniper66 Member

    Joined:
    Jan 22, 2012
    Messages:
    1,425
    Location:
    Kansas
    I'm going to an auction that has a substantial quantity of IMR 4198 for sale...several 8-lb containers. I am fairly new to reloading and have only used Benchmark, Varget, and H110, but see in my manuals that 4198 is used in a number of loads. What do you guys out there use it for and what does it typically sell for?...I'm guessing somewhere above $20 per lb. I'm also assuming it is a good powder, but want some guidance before I buy a large quantity. What do you say? I would use it mostly for .223 and p-dogs if that helps you answer my question.

    Tom
     
  2. powell&hyde

    powell&hyde Member

    Joined:
    Jan 17, 2011
    Messages:
    238
    Location:
    Iowa
    Imr 4198 is a good all around fast burning powder for rifles. I use it on my .223 as well as Varget. Around here I'm paying $26.99lb.
     
  3. kingcheese

    kingcheese Member

    Joined:
    Nov 29, 2008
    Messages:
    677
    I just paid 30 for a pound two days ago
     
  4. steve4102

    steve4102 Member

    Joined:
    Oct 14, 2004
    Messages:
    2,452
    Location:
    Minnesota
    It's on the fast side for the 223. Some have trouble getting it to properly cycle their AR actions.
     
  5. FROGO207

    FROGO207 Member

    Joined:
    Dec 7, 2008
    Messages:
    6,488
    Location:
    Mount Desert Island Maine
    In the .223 it is used with the lighter bullets from 40 to 60 grains. I also use BLC-2, Reloader 10X, and X-terminator with good results in the 223. If you are going to reload 55 grain bullets by the boat load then get some. As of late I have been using WC 844 that is available from Pats Reloading for around $11 a pound. Yes there is a Haz-Mat fee but when I buy 24 pounds and 10K primers in one box the price becomes really reasonable IMHO. The WC 844 is the almost same as H335 for all practical purposes. Also the WC 846 is like BLC-2 and will work in the 223/308 and a host of other calibers.I would draw the line at $15 a pound for larger quantities if I were bidding and be more apt to bid at $10 tops. Good luck whatever you do.:D

    FYI Powder Valley has IMR4198 for 19.95 a pound today not counting a Haz Mat fee.
     
    Last edited: Sep 29, 2012
  6. joecil

    joecil Member

    Joined:
    Apr 12, 2012
    Messages:
    782
    Location:
    Lexington, Kentucky
    I paid $24 for 1 pound recently. I will be using it with a 405 gr cast bullet in a 45-70. I also use IMR 3031 and Reloader 7 depending on the game I hunting.
     
  7. 7.62 Nato

    7.62 Nato Member

    Joined:
    Aug 8, 2009
    Messages:
    799
    Location:
    Michigan
    Hi-techammo.com has the WC844, and WC846 military pull down powders listed for about $10-11 a pound for 8lb. containers. I'll probably be ordering some this weekend for 5.56x45, 6x45, .243, and (of course) 7.62 Nato. ;)
     
  8. Ditchtiger

    Ditchtiger Member

    Joined:
    Apr 8, 2006
    Messages:
    886
    Location:
    Junction City,OR
    It see's a lot of use in my .222 Remington, works with my 444 marlin and jacketed bullets also.
    Back in the 50's the .222 - IMR4198 combination was king of the bench rest hill.
     
  9. 243winxb

    243winxb Member

    Joined:
    Jul 7, 2004
    Messages:
    9,300
    Location:
    Hopewell Big Woods
    IMR 4198-Load Data from 17 Rem to 458 Win. Mag Rifles

    I used IMR 4198 (Dupont) for years in the 223, still do. Does not go thru a measure well. Expect as much as .4 gr variation. If theres lube in the case neck, powder may bridge from some measures. There was a post on this forum, where it did not work well in 1 Ar15 with very light bullets, 40gr if i remember correctly. Best with bullet 50-55 gr for me. IMR4198 will not produce the maximum velocity, for most cartridges. My old Dupont was $10 per pound, by the case years ago. Worked well in the 222 Rem also.
     
  10. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    22,568
    Location:
    Northeast PA, USA
    An 8lb jug of IMR4198 goes for $164 here.

    I would not use it in the .223 especially in a semi-auto rifle. I use 4198 for my 45-70 ammo and sometimes for lead bullets in the 30-30.
     
  11. Bio-Chem

    Bio-Chem Member

    Joined:
    Oct 6, 2011
    Messages:
    246
    Location:
    Utah
    works great in my 444 marlin
     
  12. MARKMALL

    MARKMALL Member

    Joined:
    Aug 8, 2009
    Messages:
    167
    Location:
    N.E. Ohio
    I have used it in 270 Win. with 100 gr. bullets. Around here it sells for $21.50/lb or $135.00/8 lb.
     
  13. Sniper66

    Sniper66 Member

    Joined:
    Jan 22, 2012
    Messages:
    1,425
    Location:
    Kansas
    --------------------------------------------------------------------------------

    Well the auction is over and I came home empty-handed. The 8-lb containers of powder sold for $110-$140; the 4198 sold for $110 with one guy buying all 3 containers. So he got a pretty good deal. There were lots of good bargains on ammo. One guy bought 100s of rounds of several different calibers, but I am reluctant to buy reloads. You know the old saying, "never shoot another man's reloads". I passed up a Winchester '97 in 16 ga. It was the best gun at the sale...went for $525. Still, it was lots of fun.
     
  14. PapaG

    PapaG Member

    Joined:
    Sep 12, 2010
    Messages:
    2,129
    Location:
    Il
    Used to use it in my 308 and 30-06 with cast bullets in postal match competition. Also use it in my 444. Didn't like it in my 45-70 but that was just me......I use FFg black in it now.
     
  15. FROGO207

    FROGO207 Member

    Joined:
    Dec 7, 2008
    Messages:
    6,488
    Location:
    Mount Desert Island Maine
    In my limited exposure to public auctions the prices are usually above retail if there are any motivated buyers there. Or they sell things for dirt cheap. Never a middle ground for sure. At least you did not get caught up in a bidding war and spend too much.:cool:
     
  16. Sniper66

    Sniper66 Member

    Joined:
    Jan 22, 2012
    Messages:
    1,425
    Location:
    Kansas
    Hey Frog....You are right about the auction issue. In fact, I had quit going to auctions because I would have to wait around for hours to bid on the one or two items I was interested in, only to have them sell for well above the price I was willing to pay. For this auction, the guns, ammo, and reloading components were the big draw so they sold all of it first. Locally, guns are always a big draw. All too often, they sell for full retail or more. People are eager to own unregistered guns, especially handguns. The only pistol there was an off-breed semi auto 22 mag, worth maybe $300-$400 and it sold for $525. It was a good day for the widow that was selling her deceased husband's collection.
     
Thread Status:
Not open for further replies.

Share This Page