Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

IOR 3x25 tactical.

Discussion in 'Shooting Gear and Storage' started by Slimjim, Sep 24, 2006.

Thread Status:
Not open for further replies.
  1. Slimjim

    Slimjim Member

    Joined:
    Jan 3, 2004
    Messages:
    751
    Location:
    Maryland.
    Im looking at getting an IOR for my FS2000. Considering it as i want an optic that can hit midrange and close targets.

    IOR scope

    www.valdada.com/vn/ior/03q
    This is the scope im looking at. does anyone have experience with one?
     
  2. guninhand

    guninhand Member

    Joined:
    Feb 1, 2006
    Messages:
    7
    Location:
    Canada
    IOR scope

    I don't have experience with the scope you are looking at but I do have experience with an IOR 1.1X4X26. It is a strong and well built scope with great optics but one vexing problem, parallax and lots of it. When I first got this scope it was on a .223 rifle and I didn' notice any problems. I was hitting plates at 200yds and claybirds at 50 yds. Then I put it on a .308 rifle. very soon I had problems, bad groups that made no sense. Someone checked it out for me and parallax was the culprit. If I moved my head about 1/4 inch the aiming dot would move around 6 inches on a 100yd target. Now I don't know if I never noticed it before because I was making a good consistant cheek weld enough of the time, or if something is recently gone out of wack with the scope.

    So I would advise checking deep into this scope on parallax issues.
     
Thread Status:
Not open for further replies.

Share This Page