Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is the RCBS Uniflow supposed to come with just one cylinder?

Discussion in 'Handloading and Reloading' started by stevekl, Jan 19, 2007.

Thread Status:
Not open for further replies.
  1. stevekl

    stevekl Member

    Joined:
    Jul 31, 2004
    Messages:
    394
    Location:
    Richmond, VA
    I picked up a uniflow today and I have read tonight about the smaller cylinder designed to throw more accurate, smaller charges. Alot of people are implying that the Uniflow comes with two cylinders, but mine only came with one (the larger rifle one). Did I get a bad package or what?
     
  2. mrkubota

    mrkubota Member

    Joined:
    Nov 24, 2004
    Messages:
    102
    Location:
    Eastern AZ, SoCal
    Mine came with two, but that was 30yrs ago....
     
  3. Idano

    Idano Member

    Joined:
    Oct 2, 2006
    Messages:
    933
    stevekl originally they only came with two now they sell them with either one or two. It was a marketing ploy to to raise the price but still over a single drum measure at a lower price. I just bought my second one on eBay and it came with two drums for $44 total with shipping. If you haven't used your yet and want both drums take it back and watch eBay.
     
  4. DaveInFloweryBranchGA

    DaveInFloweryBranchGA Member

    Joined:
    Dec 7, 2005
    Messages:
    1,539
    Location:
    NE Georgia
    If you bought it new and want two cylinders, you can take it back and order one with two cylinders from Midway new or like Ideano said, bid for one on ebay. They come up quite often on ebay, craigslist and at gunshows, because they are a popular measure.

    If you bought it used, just watch for the cylinder you don't have on ebay, craigslist or at the gunshows. Or you can buy one new or post you're looking for one on the various reloading forums you read and somebody will help you out.

    Dave
     
  5. tbtrout

    tbtrout Member

    Joined:
    Oct 14, 2006
    Messages:
    1,004
    Location:
    New Jersey
    Check out ebay, they regularly have cylinders and measures @ a good deal. I picked up a couple for $30 with shipping.One for $22 without a hopper. If it has a broken hopper or missing a piece bid and get it for the low price, call RCBS and they will send you replacement pieces. My experience with thier customr service has been the same as I have recieved from Dillon so far. if the drum is a little rust take some steel wool to it and it will shine up and work beautifil. Good luck
     
  6. Peter M. Eick

    Peter M. Eick Member

    Joined:
    Dec 28, 2002
    Messages:
    5,035
    Location:
    Houston, TX
    I just called up RCBS and asked about it and they sent me one.

    Just a thought....
     
  7. wheezengeezer

    wheezengeezer Member

    Joined:
    Dec 19, 2006
    Messages:
    22
    if you reload a vareity of rounds ,then you will want one measure with each!! it saves setup time.i have a few measures setup for specific charges.
     
  8. cloudcroft

    cloudcroft Member

    Joined:
    Sep 13, 2006
    Messages:
    353
    Location:
    Colorado Springs, CO
    Mine from Midway only came with one cylinder -- large -- but that was okay because I only use this "large powder charge" measure for reloading rifle cases, and to cut the more-difficult-to-meter extruded rifle powders. It's mounted by itself on the bench. I probably won't ever get a small cylinder for the Uniflow.

    For pistols, I use my Lee Perfect Powder Measure Pro mounted on my Lee Classic Turret press.

    -- John D.
     
  9. DaveInFloweryBranchGA

    DaveInFloweryBranchGA Member

    Joined:
    Dec 7, 2005
    Messages:
    1,539
    Location:
    NE Georgia
    Cloudcroft,

    Are you sure that isn't a Lee Pro Auto Disk you've got mounted on the turret press?

    Dave
     
  10. brickeyee

    brickeyee Member

    Joined:
    Feb 25, 2005
    Messages:
    3,135
    I use two Uniflows with micrometer heads on them.
    The problem with only one is that if you change the cylinder the micrometer looses the 'zero' it had before. No more looking up the loads from a month ago and dialing in and being nearly perfect.
     
  11. Rico567

    Rico567 Member

    Joined:
    Feb 10, 2004
    Messages:
    559
    Location:
    IL
    I got my Uniflow from a guy on AA slightly used, had the rifle rotor in it, which is the one I wanted in any event. All my pistol loading is done with Dillon measures, and anything finicky I do with an electronic scale / dispenser unit. I wasn't going to complain in any case, because I got the Uniflow for only $26, and I understand that by the time this one was made they only ship with one, and the other is available as an accessory.
     
  12. cloudcroft

    cloudcroft Member

    Joined:
    Sep 13, 2006
    Messages:
    353
    Location:
    Colorado Springs, CO
    Dave,

    It's the Pro Powder Measure with the charge-bar...whatever the measure itself is called I'm not sure. Lee has too many similar names for it's products..I get confused!

    -- John D.
     
Thread Status:
Not open for further replies.

Share This Page