Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Just got a Ruger SR9 and having a problem

Discussion in 'Handguns: Autoloaders' started by Rusty Luck, Jul 21, 2012.

Thread Status:
Not open for further replies.
  1. Rusty Luck

    Rusty Luck Member

    Joined:
    Oct 6, 2011
    Messages:
    349
    Location:
    Houston, Texas
    I did a field strip to wipe it down and now the trigger will not reset, anyone have this problem? Suggestions?
     
  2. labhound

    labhound Member

    Joined:
    Feb 8, 2010
    Messages:
    574
    When you disassemble it you have to drop the mag, lock the slide open, reach inside and push the ejector down, then take the slide off. When you reassemble it you have to put the slide back on, put the mag back in and rack the slide for the ejector to come back up and then the trigger will reset.
     
  3. Rusty Luck

    Rusty Luck Member

    Joined:
    Oct 6, 2011
    Messages:
    349
    Location:
    Houston, Texas
    So I completely took the gun apart all the way to the last bit and reassembled and it works perfectly now, Im unsure what happened but reassembly fixed it. Thanks.
     
Thread Status:
Not open for further replies.

Share This Page