Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Just ordered classic turret

Discussion in 'Handloading and Reloading' started by Dustin0104, Jul 9, 2011.

Thread Status:
Not open for further replies.
  1. Dustin0104

    Dustin0104 Member

    Joined:
    Jun 23, 2011
    Messages:
    101
    Location:
    Pennsylvania
    I just finished ordering my classic turret press and all acessories from factory sales. Got done and realized I had accidentally ordered the auto disk instead of the pro. Will I do ok with the standard auto disk?
     
  2. weeniewawa

    weeniewawa Member

    Joined:
    Jul 20, 2007
    Messages:
    117
    Location:
    Central **********
    send an email to whoever you bought it from and tell them to change it

    or call them and leave a message explaining it along with your order number

    I prefer the pro auto disc with the micrometer powder adjustment add on. much easier to fine tune charges than the discs

    I just made an order from Lee just now for a reconditioned breech lock single stage
     
  3. john16443

    john16443 Member

    Joined:
    Mar 1, 2011
    Messages:
    414
    Location:
    Ramona, CA
    You should do OK with the auto disk. Lee does have an upgrade kit available to make it closer to the pro http://leeprecision.com/xcart/Pro-Auto-Disk-Update-Kit.html

    Call Factory Sales now, leave a message with your order number, tel# and your email address, tell them they should check the email ASAP on Monday morning, and that you want to upgrade to the pro auto. Send them an email now with your order changes. Then first thing Monday morning when they open, call them and make the additional payment of around $10. They should be able to take care of it.
     
  4. Dnaltrop

    Dnaltrop Member

    Joined:
    Feb 12, 2010
    Messages:
    1,540
    Location:
    Portland, Oregon
    Don't forget, if you're using the primer feeders, to order 2 risers for the autodisk pro, otherwise it won't clear the primer feeder when the turret rotates.

    Love the 4 hole, have it on the metal tripod. It all fits in my very tiny reloading space perfectly. just takes some practice to get the angles set right for a comfortable session.
     
Thread Status:
Not open for further replies.

Share This Page