Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Kimber Pro Raptor II

Discussion in 'Handguns: Autoloaders' started by CTGunner, Feb 20, 2011.

Thread Status:
Not open for further replies.
  1. CTGunner

    CTGunner Member

    Joined:
    May 31, 2009
    Messages:
    934
    I am posting a few pictures of my new Kimber Raptor II. So far I have fired 240 rounds through the gun. In the first 60 rounds I had approximately 10 failures - mostly failures to feed. I took a quick break and came back to the gun. I made a very focused effort to maintain a tight grip on the weapon...and after that no more failures. I made it to 240 rounds trouble free. I still will not trust the gun completely until I have at least 200 additional rounds down range but I am generally feeling good about the gun. Accuracy is solid. While not the most accurate 1911 I've shot it's certainly acceptable for a carry gun. The grip size is perfect for me and I like the extra weight that comes with the Steel Construction.

    I couldn't find many reviews of this gun so please feel free to share your experiences with the Raptor 1911. Especially with respect to reliability.
     

    Attached Files:

  2. mes227

    mes227 Member

    Joined:
    Jan 12, 2011
    Messages:
    203
    Location:
    Incline Village, NV
    What ammo gave you the FTF problems? I have 1,000 rounds through my Tactical Entry II and the only FTFs were with dirty Russian rounds (Herter's). I've tried a variety of other brands and even hand loads without a single problem. I'd be surprised if how you held the grip made any difference in the FTF; perhaps you changed ammo? Did you clean the gun before your first range time? I did and it was recommended by the salesman; just to make sure any residue or burrs from manufacturing were cleared as well as to make sure it was properly lubricated. Out of the box mine seemed very clean but completely non-lubricated.
     
  3. CTGunner

    CTGunner Member

    Joined:
    May 31, 2009
    Messages:
    934
    I was using 230 grain American Eagle - it was clean stuff. I didn't break the gun down as I took it directly from the showroom floor to the range. I did drop some oil on the slide though before shooting as the gun looked pretty dry. I'm glad to hear that yours has been 100%. I'm hoping my last 180 rounds or so are an indication of solid future reliability. I didn't break it down and cleaned it thoroughly after shooting. The internals look fine.
     
  4. dusty14u

    dusty14u Member

    Joined:
    May 20, 2009
    Messages:
    718
    Location:
    Eastern NC
    I bought a Raptor II about 1-1/2 years ago. I have only shot my reloads through it and it has been uber reliable. I guess I have 1500-2000rds through it and it seems to get smoother with each range trip. It has been extremely accurate.

    I belong to aprivate gun club and when I get to the indoor range it is often empty so I can turn off the lights on half the range and practice using the night sights. I think the gun is one of the finest looking and funtioning 1911's made.
     
  5. TIMC

    TIMC Member

    Joined:
    Feb 16, 2003
    Messages:
    2,807
    Location:
    Texas
    I love my Pro raptor, it has been nothing but reliable with everything I have put in it. I do use just a little grease on the slide of my semi-autos it helps with keeping the action smooth and reduces wear.
    KimberProRaptorII.gif
     
  6. CTGunner

    CTGunner Member

    Joined:
    May 31, 2009
    Messages:
    934
    Glad to hear the positive comments on the Raptor. Nice pics gang.
     
Thread Status:
Not open for further replies.

Share This Page