Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Kimber warrior range report:

Discussion in 'Handguns: Autoloaders' started by BADUNAME13, Mar 3, 2007.

Thread Status:
Not open for further replies.
  1. BADUNAME13

    BADUNAME13 Member

    Joined:
    Nov 12, 2006
    Messages:
    1,802
    Location:
    Gulf Coast
    I did a test with my New Kimber Warrior.

    First let me back up and tell how I got started.
    I heard everyone talking about how they would trust a Glock 'right of the box'
    So:
    Glock 19. I bought it NIB, and took it to the range.
    First day, had a jam between round 200 and 250.

    Cleaned and lubed it. Had a SECOND jam by round 500.

    Today I have ~ 3,000 through that Glock 19 and have had 4 jams.
    (Including ~1,000 in Tactical Responses Fighting pistol class)
    Ammo was Blazer or WWB.

    ------------------------------------------------------------------------------------------------

    Kimber:
    Buy a Kimber Warrior
    (Take it apart, and inspect it in the shop)
    Put 450 rounds through it before today (Never lubed or cleaned)

    Shoot it today in this manner:
    4 mags, 2 rounds in each mag.
    Double tap, speed reload, double tap till mags are empty.
    Top off mags, repeat (No stops)

    Round 804 failed to feed.
    The pistol was SMOKING!, and my middle finger was ALMOST uncomfortably warm. (Grip was warm.)
    A simple tap, rack, bang cleared it and when I picked up the round IT was warm. (I'm sure the failure was due to heat and not dirt.)

    Whatever the case, Over 800 rounds UNLUBED, Straight out the box... This pistol is good to go.

    Now I've got to go clean it and say I'm sorry...

    All ammo was Blazer brass cased.
     
  2. mattw

    mattw Member

    Joined:
    Feb 19, 2005
    Messages:
    1,880
    I would blame the Blazer ammo before I blamed heat or dirt. Blazer is crap cheapo ammo.

    I really think you should've cleaned your warrior before firing it though... It probably still had some factory grit. Too late to worry about that now though, shoot it up and have fun!
     
  3. BADUNAME13

    BADUNAME13 Member

    Joined:
    Nov 12, 2006
    Messages:
    1,802
    Location:
    Gulf Coast
    It was a test...
     
  4. Pk14

    Pk14 Member

    Joined:
    Oct 3, 2006
    Messages:
    46
    I have had a similar experience with my Warrior - a great pistol with ZERO failures of any kind through its first 400 rounds so far.

    It does show a preference with certain kinds of ammo for accuracy. The one round I thought would give it problems was the old CCI Lawman 200 grain 'Flying Ashtray' - 1st three rounds at 7 yards were just one .60 inch hole!

    [​IMG]

    The target was from this past Wednesday - 20 rounds of the 200gr Lawman just left of COM followed by 15 rounds of 185gr Remington FP in the head, all at 1 shot / sec.

    It's a keeper! :)
     
  5. 10-Ring

    10-Ring Member

    Joined:
    Dec 24, 2002
    Messages:
    12,037
    Location:
    California
    Congrats on your new Kimber! ;)
     
  6. Shipwreck

    Shipwreck Member

    Joined:
    Mar 6, 2005
    Messages:
    3,625
    Location:
    Texas
    Yes, congrats! :p

    And as for Blazer - CCI Blazer is all I shoot. Always had good luck w/ it.
     
  7. 357wheelgunner

    357wheelgunner Member

    Joined:
    Apr 23, 2004
    Messages:
    942
    Location:
    Rural South
    Thanks for posting this, I hear way too many "kimbers are bad" when I know that there are plenty of people who like them.

    As soon as I have the funds I'm buying a TLE II.
     
  8. cookie4u1

    cookie4u1 Member

    Joined:
    Jan 14, 2006
    Messages:
    48
    Location:
    indiana
    It does seem like that no matter what good or bad experiences you have somebody will dissagree. Makes it rough for someone to choose if they go by what they read. I'm going to get a new .45 at the funshow. Can't make up my mind so I'll hopefully know its the right one when I put my hands around it.
     
  9. david_the_greek

    david_the_greek Member

    Joined:
    Nov 2, 2005
    Messages:
    533
    i'm going to have to add another happy customer with kimber. took mine out on a near zero degree /wet/frozen/muddy day after hunting and she just kept shooting with no hiccups. I think my hands were closer to a malfunction from the cold than the pistol was to a malfunction.
     
  10. tbtrout

    tbtrout Member

    Joined:
    Oct 14, 2006
    Messages:
    1,004
    Location:
    New Jersey
    I love my Warrior, I have about 500 rds through it. Only used Blazer and Wolf(it was cheap) and all went bang with no problems.Wolf was dirty as hell though. Enjoy it.
     
  11. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,768
    Location:
    Alabama
    Welcome to Kimberland. Now you can just shake your head at the Kimber bashers.:)
     
  12. BADUNAME13

    BADUNAME13 Member

    Joined:
    Nov 12, 2006
    Messages:
    1,802
    Location:
    Gulf Coast
    Sorry, been carrying a Kimber Pro carry for 4-5 years.
     
  13. Kimber1911_06238

    Kimber1911_06238 Member

    Joined:
    Jan 14, 2007
    Messages:
    1,548
    Location:
    AZ
    my kimber custom classic is going strong ~6000 rounds. only 4 FTE's and one was because of a case rim failure.

    congrats on the new kimber...should serve you well
     
  14. Patriot-Brewer

    Patriot-Brewer Member

    Joined:
    Apr 2, 2006
    Messages:
    197
    Location:
    In occupied territory on the southern Left Coast
    I also have a Warrior and love it. It loves Blazer, and anything else I've put
    through her, but doesn't like Blazer Brass. With the Blazer Brass, I'll get a FTF on slide release on a full magazine sometimes. Runs flawlessly once loaded.

    I've got 550 rnds, I think, through her so far. I did not clean it during the last 250 rnds and plan to put another 250 through her tomorrow. Not one jam of any kind while firing.

    I also put a Hogue wrap around grip on it and love it.
     
  15. shaggycat

    shaggycat Member

    Joined:
    Dec 30, 2005
    Messages:
    422
    Location:
    Nashvegas
    No one told my Kimber it was supposed to fail. It has been perfect since round 1.
     
  16. orionengnr

    orionengnr Member

    Joined:
    Jan 3, 2005
    Messages:
    5,434
    I'm currently on my third.

    If the first had not thoroughly impressed me, there would not have been a second. And so on.

    Current one is a stainless Ultra Carry. It (like it's predecessors) has been perfect.
     
Thread Status:
Not open for further replies.

Share This Page