doc540
Member
finally found some Magpul P-mag's
Latest Budget AR Mod
- Thread starter doc540
- Start date
- Status
gvnwst
Member
Great "mod"!
Sooo....where you find them?
Sooo....where you find them?
doc540
Member
MT GUNNY
Member
Let me say that Bushnell is one Good Purchase also. It is Unbelievably Reliable. As a matter of fact when I get a Acog to replace it, I will install the Bushnell on my WASR10.
doc540
Member
Thanks, Gunny, especially at $50.
cibach
Member
very nice
doc540
Member
"Where did you get the 'cheek riser' thingy on the stock? I like it."
They come in a two pack with two different heights to match your optics height.
$20...like I said, "budget".
Here's one of many places that carry them:
http://www.lg-outdoors.com/proddetail.asp?prod=51189
They come in a two pack with two different heights to match your optics height.
$20...like I said, "budget".
Here's one of many places that carry them:
http://www.lg-outdoors.com/proddetail.asp?prod=51189
doc540
Member
Yes, A2 handle-mounted optics need a higher cheek rest, and this one fits the bill perfectly.
On my budget there ain't no frills and bling on that gun.
I'm spending whatever extra money I make on ammo.
On my budget there ain't no frills and bling on that gun.
I'm spending whatever extra money I make on ammo.
Killermonkey21
Member
I'm assuming you cannot use your iron sights while in that configuration? Please correct me if I'm wrong.
But in any case, a very nice build.
If I may ask, what was the final tally? I really need to consider building my own soon.
But in any case, a very nice build.
If I may ask, what was the final tally? I really need to consider building my own soon.
RockyMtnTactical
Member
- Joined
- Oct 21, 2006
- Messages
- 3,539
The PMAG's are excellent!
doc540
Member
"I'm assuming you cannot use your iron sights while in that configuration? Please correct me if I'm wrong.
But in any case, a very nice build.
If I may ask, what was the final tally? I really need to consider building my own soon."
Correct, with the high cheek rest, I can't see the irons although the mount has a tunnel for them. And the cheek rest can be removed with just a yank. The kit somes with 2 rests, one lower than the one shown.
Or course, even with my corrected vision I'm unable to use the irons anyway, thus the red dot.
Hard to say what I have in it since I got a great deal on the basic gun, and I've swapped, traded, ebay'ed, and budget shopped nearly all the accessories.
Retail for the mod's so far is only about $500 (including shipping):
butt pad
cheek riser
trigger pin anti-walk kit
Bill Springfield trigger job
Leupold handle rail
Bushnell Trophy red dot
P-Mag
handguard lower rail
rail covers
shorty vertical grip
green laser
About all I have left to do is GG&G sling mounts and sling.
(If I ran across a super deal I might put a 4 rail handguard on it, but the factory one works just fine with the single, lower rail.)
Then bring on the post-hurricane zombies!
But in any case, a very nice build.
If I may ask, what was the final tally? I really need to consider building my own soon."
Correct, with the high cheek rest, I can't see the irons although the mount has a tunnel for them. And the cheek rest can be removed with just a yank. The kit somes with 2 rests, one lower than the one shown.
Or course, even with my corrected vision I'm unable to use the irons anyway, thus the red dot.
Hard to say what I have in it since I got a great deal on the basic gun, and I've swapped, traded, ebay'ed, and budget shopped nearly all the accessories.
Retail for the mod's so far is only about $500 (including shipping):
butt pad
cheek riser
trigger pin anti-walk kit
Bill Springfield trigger job
Leupold handle rail
Bushnell Trophy red dot
P-Mag
handguard lower rail
rail covers
shorty vertical grip
green laser
About all I have left to do is GG&G sling mounts and sling.
(If I ran across a super deal I might put a 4 rail handguard on it, but the factory one works just fine with the single, lower rail.)
Then bring on the post-hurricane zombies!
- Status