Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Lee 1000 Indexing issues

Discussion in 'Handloading and Reloading' started by herohog, Dec 30, 2007.

Thread Status:
Not open for further replies.
  1. herohog

    herohog Member

    Joined:
    Dec 21, 2007
    Messages:
    727
    Location:
    Shreveport, VA
    I have a Lee 1000 that has indexing issues. It stops just short and the priming ram hits the shell plate. You have to push the shell plate around (about 1/4" total movement). Any ideas on how to fix?
     
  2. lee n. field

    lee n. field Member

    Joined:
    Dec 29, 2002
    Messages:
    3,731
    Lee has a video on zero adjustment. Does that look like it would help?

    Also this, from their FAQ page

     
  3. herohog

    herohog Member

    Joined:
    Dec 21, 2007
    Messages:
    727
    Location:
    Shreveport, VA
    Schweet! I'll give it a shot in the morning! This is my "spare" 1000 and I've had it in storage, unused by me since I got it 15 years or so ago. I set it up last week only to discover it had the timing issue.

    Thanks for the tip!
     
  4. ForneyRider

    ForneyRider Member

    Joined:
    Jul 26, 2007
    Messages:
    849
    Location:
    Forney, TX
    +1 on the Lee video.
     
Thread Status:
Not open for further replies.

Share This Page