Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Lee dies Hornady LNL

Discussion in 'Handloading and Reloading' started by wild willy, Feb 14, 2010.

Thread Status:
Not open for further replies.
  1. wild willy

    wild willy Member

    Joined:
    Aug 19, 2008
    Messages:
    374
    Does the lee 4 die set work ok in a Hornady LNL AP I know there has been posts in the past about some dies being threaded too short to work. Been using Redding and Rcbs thought Id try Lees
     
  2. jbrown13

    jbrown13 Member

    Joined:
    Jan 2, 2009
    Messages:
    159
    Location:
    Perry, Georgia
    All the Lee dies I've tried on my LnL AP have worked to my satisfaction.
     
  3. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,727
    Location:
    Alabama
    I have a number of Lee dies, old and new, and I have been able to make them all work. Very close to not enough threads on some, but they worked.

    First die on the left is a Lee sizer. Not much thread on the lock ring, but it works. It is an older die.

    On this Lee .44 sizer (old die) there are no threads on the lock ring. The bushing pushes it against the top part of the die and locks down.

    Old thread #1

    Old thread #2
     
    Last edited: Feb 14, 2010
  4. Randy1911

    Randy1911 Member

    Joined:
    Mar 15, 2009
    Messages:
    914
    Location:
    Arkansas
    I use Lee dies on my LnL with no problems. I did switch the lock rings to Hornady ones (I don't like Lee lock rings).
     
Thread Status:
Not open for further replies.

Share This Page