1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

lee dies with speer bullets question

Discussion in 'Handloading and Reloading' started by mrapathy2000, Dec 20, 2004.

Thread Status:
Not open for further replies.
  1. mrapathy2000

    mrapathy2000 member

    Aug 4, 2003
    new to loading using a Lee single stage and speed dies for 9mm. for the moment just sizing and depriming have heard the speed dies are not great for seating. plan on getting a deluxe die set but for now the speed die is convenient for single stage. wish they had one in 40S&W/10mm.

    sure is nice they keep it vague with nothing specific. if I start loading with this setup should I avoid speer bullets. whats the deal with speer bullets and lee dies?

    thats all, having fun sizing and depriming for now.
  2. Wil Terry

    Wil Terry Member

    Dec 26, 2002
    Black Hills, South Dakota, USA
    Frankly, I Do Believe The Biggest Problem Is Rcbs And Speer

    Are all parts of the same company, ATK.
    There is no love lost between LEE and RCBS at all!!!
  3. rbernie
    • Contributing Member

    rbernie Member

    Jan 21, 2004
    Norra Texas
    From the Lee web site:

    "Speer Warning on Factory Crimp die

    A few years back Speer ran some advertisements on the Factory crimp die, making claims that it destroyed accuracy, ruined bullets, etc. No other bullet manufacturer has a problem with it (Hawk bullet Co. recommends its use) so we included the warning in our instructions.

    There is no safety issue in using Speer bullets in conjunction with the Factory Crimp Die."
  4. dodgestdshift

    dodgestdshift Member

    Feb 6, 2003
    Marilla NY. (outside Buffalo)
    I have used the speer bullets with the lee factory crimp die, for many years with no problems and good results. I think both companies are acting like spoiled children.
  5. Black Snowman

    Black Snowman Member

    Sep 3, 2003
    Kansas City, KS
    First I've heard of it. I know RCBS likes to sell lots of profiled bullet seating plugs so that might be part of the impetus. My Lee pistol dies have a curved cup style bullet seater which can lead to variations in OAL with bullets with an inconsistant profile, but I find it actually helps feed reliability in my autos with cheap bullets if I set the die where it likes it and let the COL vary.

    I guess what really matters are the end results, but I can't imagine what the fuss would be. I know my FCD was hurting my accuracy in my .40 loads so I backed it off so the carbide band just takes out the bell. If Speer got a boat load of complaints and narrowed it down to the Lee FCD being the common theme then maybe that's what prompted the statement. Hard to know.

    Try it before you spend any extra money and see what happens. IMHO, don't go buying stuff without trying what you've got 1st. :)
  6. Jim Watson

    Jim Watson Member

    Dec 24, 2002
    Lee is not being real straighforward about it themselves.
    The original ad wars were over the Lee Factory Crimp die in RIFLE calibres. It closes a collet on the case mouth and if the bullet does not have a cannelure to crimp into, it strikes hard enough to MAKE one. Lee said that helped accuracy, Speer said it hurt it. I don't shoot many Speers but I'm sure not going to bend my Sierras, thank you, Mr Lee.

    Not the same as the Lee Carbide Factory Crimp die in pistol calilbres, which is just a taper crimp once you have gotten past the sizing ring. Which seldom does anything over a jacketed bullet anyhow.
Thread Status:
Not open for further replies.

Share This Page