Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Lil' Gun load data?

Discussion in 'Handloading and Reloading' started by .41Dave, Dec 30, 2007.

Thread Status:
Not open for further replies.
  1. .41Dave

    .41Dave Member

    Joined:
    Feb 24, 2005
    Messages:
    655
    I want to try Lil'Gun in my .357 and .41 magnums, but I'm having trouble finding recipes. Does anyone have or know where I can find Lil'Gun load data for those calibers?
     
  2. Wil Terry

    Wil Terry Member

    Joined:
    Dec 26, 2002
    Messages:
    1,129
    Location:
    Black Hills, South Dakota, USA
    Hodgdon Has All The Appropriate Loading Data In

    Any applicable cartridge. They have a wonderful loading manual. They have most of it on their internet site. I do NOT trust the latter without the former as people can mess with it.
     
  3. ReloaderFred

    ReloaderFred Member

    Joined:
    Apr 28, 2005
    Messages:
    5,738
    Location:
    Oregon Coast
    I've been using Lil'Gun in heavy bullet .357 Magnum loads for my carbine. It's working out far better than H-110 or Win. 296 for this application. Outstanding velocities and great accuracy. By heavy bullet loads, I'm talking about 175 to 185 grain cast bullets, with a gascheck. I'll start experimenting with it in .41 Magnum someday soon.

    Hope this helps.

    Fred
     
  4. .41Dave

    .41Dave Member

    Joined:
    Feb 24, 2005
    Messages:
    655
    Thanks for the replies. I tried data.hodgdon.com, but I just get an error message. Any ideas?
     
  5. GooseGestapo

    GooseGestapo Member

    Joined:
    Jan 6, 2003
    Messages:
    3,152
    Location:
    W.GA
    Hodgdon's Lil'Gun is as good as it gets in the .357mag.
    No experiece with the .41mag.

    Hodgdon lists 18.0gr as Max with a 158gr bullet. I use 17.8 as thats what my powder measure throws.

    It chrono's at 1,520fps from my 4" Ruger Sec.6
    and 2,055fps from my Win. M94 (20"bbl).
    Pressures are much lower than equivalent loads with H110/W296.
    Cases just "fall out" of the up-turned cylinder of the Sec.6.

    This is either with Rem. 158gr SoftPt or Hornady 158gr XTP-HP.

    One of the writers for HandLoader frequently lists 19.0gr with a 158. I've tried this and velocity is actually lower and accuracy worse than the 17.8gr load.

    Hodgdon Lil'Gun is superlative in the .22Hornet also. I use mostly 12.5gr with 45-40gr bullets, and 13.0gr under a 33gr V-max.

    For some reason, going above the listed max loads with the Lil'Gun gives higher pressures, but lower velocities, worse SD, and poorer accuracy. Just why I've forgotten, but when the Lil'Gun first came out, Hodgdon gave a technical explanation to the writer. I've found it to be true, whatever the reason.....

    But, this powder is much more "flexible" than the H110/W-296 that it betters for both accuracy and velocity with somewhat lower pressures, IMO.
     
  6. pinkymingeo

    pinkymingeo Member

    Joined:
    May 31, 2007
    Messages:
    591
    My experience with Lil'Gun is that it likes heavy bullets and tight crimps. It does not like reduced loads. You'll wind up with unburned powder all over the place. Stay close to published max data.
     
  7. FLORIDA KEVIN

    FLORIDA KEVIN Member

    Joined:
    Jul 10, 2007
    Messages:
    431
    Location:
    florida
    funny you mentioned the hodgdon web site ! i tried it today and it asked for a password for access ! never had that before ! i was using a link that was a shotcut ! i will try gong to the home page !
     
  8. herohog

    herohog Member

    Joined:
    Dec 21, 2007
    Messages:
    727
    Location:
    Shreveport, VA
    Same here... where do ya get a ID/PW?
     
  9. zxcvbob

    zxcvbob Member

    Joined:
    Sep 15, 2007
    Messages:
    5,061
    Location:
    S.E. Minnesota
    Has anyone tried Scot 4100 powder?

    I have 2 pounds of it. The ballisticians at Accurate say it is about 10% slower than #9, and I can use #9 maximum load data as a starting point and work up from there just a little. I haven't gotten around to it yet.

    From the tiny bit of load data available -- for any cartridge -- 4100 seems to like heavy bullets. I'm not sure that 158 (.357 magnum) and 255 (.45LC Ruger) cast bullets are heavy enough for optimum performance.
     
  10. WESHOOT2

    WESHOOT2 Member

    Joined:
    Dec 29, 2002
    Messages:
    854
    Location:
    Vermont
    erratic results

    My personal jury is still out on L'IL GUN, as I get significant feedback suggesting less-than-stellar results in certain combinations.

    That said, I get reports of great results, too, but not like the across-the-board results with W296 / H110 / AA9 / 2400 / N110.

    My 'go-to' in 357 includes 2400 (rarely), H110 (mostly), and AA9.

    My 44 Magnum 'go-to' choices include AA9, W296, and H110.

    I generally choose AA9 and W296 for 'heavies'.

    NOT knocking L'IL GUN, but hard to argue with every-environment-tested-by-time-too W296 and AA9.
     
  11. Al Norris

    Al Norris Member

    Joined:
    Dec 24, 2002
    Messages:
    570
    Location:
    Rupert, ID.
    Are you using this link to Hodgdons reloading data? Seems fine to me!
     
  12. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    21,688
    Location:
    Northeast PA, USA
    Data from the Hodgdon Site for the .41 Magnum:

    210 GR. HDY XTP 210 Lil'Gun .410" 1.580" 20.5 1505 23,500 CUP 22.5 1626 29,900 CUP

    220 GR. SPR JSP 220 Lil'Gun .410" 1.580" 18.0 1431 24,300 CUP 20.5 1563 31,200 CUP

    250 GR. WFNGC 250 Lil'Gun .410" 1.540" 17.2 1399 30,300 CUP 18.3 1474 36,700 CUP

    255 GR. WFNGC 255 Lil'Gun .410" 1.660" 18.8 1424 26,600 CUP 20.0 1500 32,800 CUP

    265 GR. WLNGC 265 Lil'Gun .410" 1.710" 20.0 1479 28,700 CUP 21.3 1558 35,400 CUP

    As for the .357 Magnum, as said above I also find Lil'Gun works very well with heavy bullets in the .357 Magnum. (170-200gr) H110/W296 still works better with 158gr bullets and lighter IMO. With heavy bullets you get higher velocities with lower pressures without sacrificing accuracy.

    Here is the data from the Hodgdon Site for .357 Magnum and Lil'Gun:

    158 GR. HDY XTP 158 Lil'Gun .357" 1.580" 16.0 1504 24,100 CUP 18.0 1577 25,800 CUP

    170 GR. SIE JHC 170 Lil'Gun .357" 1.580" 15.0 1422 25,100 CUP 17.0 1576 35,500 CUP

    180 GR. NOS PART 180 Lil'Gun .357" 1.575" 13.0 1279 27,500 CUP 15.0 1422 34,500 CUP
     
  13. .41Dave

    .41Dave Member

    Joined:
    Feb 24, 2005
    Messages:
    655
    Thanks for all the info guys!
     
Thread Status:
Not open for further replies.

Share This Page