Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LNL Case feeder & Primed Brass

Discussion in 'Handloading and Reloading' started by ferggie, Feb 22, 2012.

Thread Status:
Not open for further replies.
  1. ferggie

    ferggie Member

    Joined:
    Jul 14, 2011
    Messages:
    88
    Location:
    GREENSBORO, NC
    Anyone know of issues using the LNL Case Feeder with brass that has been hand primed? I don't trust the auto-prime on the LNL so I hand prime and inspect all my brass prior to reloading on the LNL.
     
  2. tly999

    tly999 Member

    Joined:
    Jul 31, 2011
    Messages:
    31
    I have done it since I bought my LNL 6 month ago, probably 3000+ rounds, and have never had a problem.
     
  3. atblis

    atblis Member

    Joined:
    Feb 19, 2005
    Messages:
    4,531
    Location:
    Neither here nor there
    I know that Dillon has commented that it's not an issue. Probably applicable to the LNL as well.
     
  4. Blue68f100

    Blue68f100 Member

    Joined:
    May 25, 2011
    Messages:
    3,195
    Location:
    Piney Woods of East Texas
    Should not be a problem. Ever thing is plastic and noting to hit the primers. But doing it off the press kinds of defeats the progressive process.
     
  5. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,764
    Location:
    Alabama
    Besides, your primers are below flush, right..... :)
     
  6. Bowfishrp

    Bowfishrp Member

    Joined:
    Aug 17, 2007
    Messages:
    246
    Location:
    Spring, TX
    Well I have been doing it that way for about 4 years. After breaking at least 4 handles on my Lee hand-primer I decided its time to use the LNL to prime since thats what its for.
     
Thread Status:
Not open for further replies.

Share This Page